Is this a Dodge or Plymouth upper door "pad" metal?

[68_661charger]

2838672 part number is it for a hardtop Dodge or Plymouth? If a Dodge, would an XH 1970 Charger have used this?
Thanks all!

 

[davek]

I tore my 70 down and that does not go to it.

 

[davek]

upper pads for charger look like this

 

[Charles Cook]

Dodge and Plymouth are different. Also hard top and post are different.

 

[RemCharger]

I tore my 70 down and that does not go to it.

View attachment 1803486

upper pads for charger look like this View attachment 1803488

If yours had pads, it's not an XH Charger

 

[Charles Cook]

I tore my 70 down and that does not go to it.

View attachment 1803486

You didn’t tear your Charger down, your tore it up.

 

[davek]

If yours had pads, it's not an XH Charger

no pads on mine

 

[68_661charger]

I thought the deal with the all new base model 70 Charger was no upper door pads front or rear?

 

[68_661charger]

Found and borrowed a pic on the internet for a 70 XH Charger. Looks like the part I posted, even has the 2 screw holes through the face. Just cant find much on the part number 2838672

 

[ROYSTOLL2]

I think it is a Plymouth as they are steel and the dodge are covered in vinyl. They are different sizes. I just got a Plymouth one for a Road Runner and I had a heck of a time finding it.

 

[68_661charger]

Dodge is covered in vinyl? I had assumed a Coronet and an XH 70 Charger used the same metal piece, just not the one a hardtop roadrunner used.

 

[dadsbee]

Dodge is covered in vinyl?

NO !

 

[Charles Cook]

I have a 68 Coronet, no vinyl.

 

[68_661charger]

I know they're not vinyl covered. To sum up this thread I have either a Plymouth or a Dodge metal panel that may or may not fit and be correct for an XH Charger. Got it

 

[Charles Cook]

Plymouth will not fit the Dodge product

 

[Cop car wagon]

Just checked for part number. The one listed xxx672 is a right plymouth according to my known one.
If it fits charger?, I do not know.

 

[68_661charger]

Yes I already knew Dodge and Plymouth were different from the start. Just asking what I had and it seems Plymouth. Thanks.

 

[davek]

Yes I already knew Dodge and Plymouth were different from the start. Just asking what I had and it seems Plymouth. Thanks.

So your not talking about the upper pad your asking if thats the metal piece that the pad would screw to,correct?

 

[68_661charger]

The first pic I posted, the black and blue panel, was from either a Dodge Coronet or a Pymouth b body... i didnt know. I furthered the question by asking if it was a Dodge piece, is it by chance the same as a 70 XH Charger. Cop car wagon thinks the panel is from a Plymouth which is fine but now I know it wont fit a Charger.