K-member/front susp worth anything?

[mopurist]

I went ahead and installed an alterktion on the RR project.

I am very limited in storage, and doubt I will ever use any of the original parts again, so...

I have the front susp and non-hemi K-member from drum to drum (manual brakes and steering) off of a 69 RR. Is it worth anything? Scrap it?

 

[Seax440Dodge]

If you weren't so far away, I'd gladly take it off your hands

 

[Cranky]

Yes, it's worth something. 11" drums? There's always someone looking for control arms etc. Is there a sway bar on it too?

 

[ws27]

Where are you from? Parts are always worth keeping around for someone. They don't make this stuff anymore.

 

[Basket case]

definitely don't scrap it. If I was closer, I'd take it. someone will need that stuff.

 

[RS23VOA]

I have a complete, intact set out of a 70 6pk car. i hung it on the wall in the shop. Takes up very little space that way.

 

[mopurist]

Believe me, if I had the room, I'd hold on to everything. I'm borderline hoarder.

I have no room to hang anything else on the wall. Rafters are full too.

Too small of a garage, and too much crap.

If anyone knows someone in central Nebraska that would be interested, send them my way--soon.

Cranky: yes, 11" drums, and I'm 99% sure that it has sway bar too. I can't remember for certain though, and can't get to it right now to check.

I have a set of front fenders too. I believe one is original to the car, and one is apparently from a Satellite (has lots of molding mount holes brazed up). Both are in rough shape.(dents and a few not-so-good repairs, etc) Anyone interested in these for cheap? -- Again, hate to scrap them, but I don't have room to hold on to 'em.

 

[Cranky]

Instead of scraping, advertise the parts. Even if you sell them dirt cheap, you'll get more than scrap price.....

 

[Budnicks]

I have a complete, intact set out of a 70 6pk car. i hung it on the wall in the shop. Takes up very little space that way.

yeah I have a pretty much complete set with steering too, off a 68 RR,
I'll have another one here shortly too...LOL...

- - - Updated - - -

I went ahead and installed an alterktion on the RR project.

I am very limited in storage, and doubt I will ever use any of the original parts again, so...

I have the front susp and non-hemi K-member from drum to drum (manual brakes and steering) off of a 69 RR. Is it worth anything? Scrap it?

I've done the swap a couple times too, seem to be hard to sell parts,
can't hardly give them away, which I won't do...LOL
shipping large parts is costly & allot of people are really cheapskates too...

Good Luck