Greg Ducato
Workin' on it...
- Local time
- 3:48 AM
- Joined
- Mar 28, 2012
- Messages
- 1,563
- Reaction score
- 1,284
- Location
- Weatherford Texas
That will be a great look!
Lets see all the cool 66-67 b-body mopar pictures.!!
- Thread starter 67coronetman
- Start date
67RT440
Member
Pictures from the last car show, Nice day , Great cars , Good food and all proceeds go to our local cancer center. Thanks to Valley Muffler in Yuba City,
California for putting on the Show!
megaivtes
Well-Known Member
My 67....picked up about 3wks ago. Now looking to see max size tires that can fit on 15x8's in rear.
Banzaiii67
Well-Known Member
In my experience 255/60-15 if your wheels have 4"+backspacing, if your backspacing is 5"+ you might be able to clear 275/60-15. The outside edge of the inner wheel well has a ridge that sticks out further than wheel lip.
Bought in October if I recall it right. A genuine grandma's car. But this is all about to change. She was built as a "Silver Special," with a black and silver accented interior. And a black with silver highlights vinyl roof. A 318 engine with torque-flight transmission is original, at sixty four thousand miles. She's a nice cruiser, but when done she will be updated with a 440, a 8 3/4 open rear (3:26). I have a pair of eight by fifteen steel rear wheels from Classic Industries, but the front, seven by fifteens have been back ordered for three months, which is holding my progress up. Tire size has yet to be determined. New rear springs, and a front disk brake system from Pirate Jack, is waiting on the front wheels. Plus new suspension/steering components for the front, complete with large diameter torsion bars. She needs a new/rebuilt power steering box. So far the company on the Columbus Ohio area, has my attention. And lastly I have a new tank and sending unit. It will be capped off with a new/repo 67' GTX styled gas door. Any suggestions on the above is appreciated. Thanks
67coronetman
Well-Known Member
Thanks for sharing everyone...
Just wheels
Active Member
Can't remember if I posted this, I'm getting old. Sold the '66 and this is what I got. Just put in a Firm Feel box stage 2. Have a couple of things to tidy up, but getting there.
Banzaiii67
Well-Known Member
Just ordered 4.. 15x7's.. Hopefully they will squeeze into 275/60-15s for the rears
Banzaiii67
Well-Known Member
Ended up getting these.. U.S. Mags U102. I prefer them to the Vision wheels I posted above
67coronetman
Well-Known Member
Wow some great looking cars ....
67coronetman
Well-Known Member
You can fit 275/60/15 i did under my car...
XMAN JR
Well-Known Member
Yo, where did you get those wheels ? I think they would look good on my barracuda.
Banzaiii67
Well-Known Member
I'm getting them from my local tire shop for the same price Summit sell them for.
They don't make them in small bolt, just 5x4.5
https://www.summitracing.com/search...s-standard-u102-gray-wheels-with-machined-lip
They are the same price at Jegs, if you prefer.
XMAN JR
Well-Known Member
XMAN JR
Well-Known Member
I will have to check those wheels out. I changed my barracuda to big bolt pattern
Mike Gaines
Well-Known Member
- Local time
- 1:48 AM
- Joined
- Apr 17, 2014
- Messages
- 2,101
- Reaction score
- 4,334
- Location
- Ahwahnee, (Fresno) California
Al, You got that 440 humming...good job
Brewzer67
Well-Known Member
Here are some pic's of my '67 500. Unfortunately it has a few bubbles that cropped up so we will likely be painting it over winter. We are probably going to go to silver instead of the black so I can spend more time driving and less time polishing
. Currently making the switch to TrickFlows and a roller cam so it should be pretty fun once back together.
. Currently making the switch to TrickFlows and a roller cam so it should be pretty fun once back together. Similar threads
- Locked
