Lets see all the cool 66-67 b-body mopar pictures.!!

[sparkswillfly]

What size wheels. I'm contemplating same wheels for my 66

15x8 with M&H 275/60/15
17x4.5 with a 28" M&H frontrunner

My rear end is narrowed 1.75" - you may need to run a 15x7 rear wheel for clearance.

 

[Jeff_383]

15x8 with M&H 275/60/15
17x4.5 with a 28" M&H frontrunner

My rear end is narrowed 1.75" - you may need to run a 15x7 rear wheel for clearance.

funny, those don't look like 17's, but look good

 

[sparkswillfly]

funny, those don't look like 17's, but look good

.....sorry - 15x4.5 fronts

 

[1 MEAN66]

A couple 67 X's I had years ago

What ever IMG is that is what shows up on screen. I click on it and nothing happens. So what is the old fart doing wrong? I e-mail only, not facebook etc. is that the problem?

 

[1 MEAN66]

Well I turn about 30 pages, do not know if I ever posted here before. If I have you just will get stuck looking again. I have no idea who the gentleman is in the car, But at what car shows we attend, They are all allowed to get in!! It is usually the only one there with "monkey bars" in it. A six year old said that and it is now who wife and I get them a bit involved. Most we ever had at one time, was four little ones all climbing back and forth, front to back seats. One nine year old actually got it out of park and it rolled a few feet down the hill. Asked his parents if I could punish him, got the nod ( after a few winks) so made him get out, turn on master switch in bumper, get in, put on seat belt, I turn on the key,had him flick on the fuel pump ( very noise one). It's got a 1050 dominator - (no choke) so takes two to three minutes to warm and idle, have to play with throttle a bit. Down spouts, Delta 40's so also a bit rowdy, engine solid mounted and makes some torque, so car shakes a bit also. THE SMILE WAS SOOOOOOOOOOOOOO BIG! Stab it Drive Then backed it back in.

 

[Big bill]

Love the redlines I have them on the back !!

 

[sparkswillfly]

Got the car out today.....looking good!

 

[Forklift]

 

[Forklift]

 

[67SniperHockey]

Just installed a custom windshield brow I made today (I also own a motorsports graphics business so I dreamt this idea up last night). On a 67 Coronet 2 Door Hard Top R/T that I just got this past weekend.

 

[old-school]

Just installed a custom windshield brow I made today (I also own a motorsports graphics business so I dreamt this idea up last night). On a 67 Coronet 2 Door Hard Top R/T that I just got this past weekend.

View attachment 940616

I will start. I want one too.

 

[67SniperHockey]

Wrapping the hood today in satin black and reinstalling the non-functional hood scoop/vent. Have new tires to install all the way around with black mopar police rims. Headliner needs installed, and need to fix a leaky sending unit.

 

[1 MEAN66]

I will start. I want one too.

My suggestion to all though: In the front you can read it if it's not moving! I'd put it in the back then everyone could read it (except of course - other MOPAR people - depending what they've done to their vehicle's)

 

[Suregrip391]

Here’s my interior,..anyone have a Plymouth horn pad?

 

[67coronetman]

Well I turn about 30 pages, do not know if I ever posted here before. If I have you just will get stuck looking again. I have no idea who the gentleman is in the car, But at what car shows we attend, They are all allowed to get in!! It is usually the only one there with "monkey bars" in it. A six year old said that and it is now who wife and I get them a bit involved. Most we ever had at one time, was four little ones all climbing back and forth, front to back seats. One nine year old actually got it out of park and it rolled a few feet down the hill. Asked his parents if I could punish him, got the nod ( after a few winks) so made him get out, turn on master switch in bumper, get in, put on seat belt, I turn on the key,had him flick on the fuel pump ( very noise one). It's got a 1050 dominator - (no choke) so takes two to three minutes to warm and idle, have to play with throttle a bit. Down spouts, Delta 40's so also a bit rowdy, engine solid mounted and makes some torque, so car shakes a bit also. THE SMILE WAS SOOOOOOOOOOOOOO BIG! Stab it Drive Then backed it back in.

View attachment 937847 View attachment 937848 View attachment 937849 View attachment 937850 View attachment 937851 View attachment 937852 View attachment 937853 View attachment 937854 View attachment 937855 View attachment 937864

 

[theman440]

My 66 Ragtop

View attachment 18856

Mauve Poly Hemi convertible . . . just bitchin'

 

[67SniperHockey]

I designed this "ad" of my personal car. Made to look like a Chrysler advertisement from back in the day. Took the picture of my car then superimposed an actual Coronet Advertisement text from 1967 on the bottom half (and added a few things). Going to print this on my custom vinyl, laminate it, and mount it on a oversized piece of black Di-Bond and hang it in the garage.

 

[John Kehoe]

My 67 R/T 440 4spd

 

[Offender]

We finally got the OK from our Dictator (Governor) a couple weeks ago, took the old car out for some exercise, a couple hour run up to the Wife's favorite Winery to get her fix, hit a couple spots along the way....

 

[Ruby67]