Locktite on rear end bolts

[BeeKool]

I'm changing a wheel bearing in my Dakota. Got everything out and cleaned.

Do I put locktite on the bearing before I put it in. Also on the inner cap bolts or the small bolt that holds the pin to the carrier assy in place.
Sorry if my words aren't correct but y'all know what In talking about. There's very few bolts inside the pumpkin.

 

[Daves69]

My '02 Durango 9-1/4" was light grease in the bearing bore and seal. Same for the 8-1/4". I use a small drop of red on the cross shaft pin bolt myself.

You'll need to click some links but you might find free service manual downloads here.....
https://dodgeforum.com/forum/dodge-dakota-21/

 

[Yatzee]

I'm changing a wheel bearing in my Dakota. Got everything out and cleaned.

Do I put locktite on the bearing before I put it in. Also on the inner cap bolts or the small bolt that holds the pin to the carrier assy in place.
Sorry if my words aren't correct but y'all know what In talking about. There's very few bolts inside the pumpkin.

You can use Loctite bearing retainer but make sure it doesn't get in the race.