WTB Looking for a 10 spline yoke for a Dana 60

[A-merry-can]

Hey guy,

Anyone have a 10 spline yoke for a Dana 60 lying around they'd like to sell?

Thanks in advance!

 

[Suregrip391]

I am pretty sure I have two here…..I’ll count them in a bit and get back with you.

 

[A-merry-can]

I am pretty sure I have two here…..I’ll count them in a bit and get back with you.

Thanks man!

 

[Bb70charger500]

I got a 70's truck Dana sitting out back if you think it might have said yoke I can go pull it off and count

 

[Fran Blacker]

What u-joint do you want? Mopar car Dana's came 29 spline, are your gears from something else? 66/67 8.75 rears came with 10 spline yokes with large 1330 u-joint. The 1330 is the same as a 1350 or a 7290 except cup size. Not a great picture but you can see 10 spline.

 

[Suregrip391]

Sorry for the delay…..must admit, I forgot to look, very sorry….

both of mine are Dana 60 29 spline.

 

[A-merry-can]

What u-joint do you want? Mopar car Dana's came 29 spline, are your gears from something else? 66/67 8.75 rears came with 10 spline yokes with large 1330 u-joint. The 1330 is the same as a 1350 or a 7290 except cup size. Not a great picture but you can see 10 spline.View attachment 1191182

I believe it's a 7260? 10 spline out of a Dana 60. It's a really early 1970 car. I read somewhere they didn't switch to 29s until the 70 year got going. I think the 1350 is a little larger than the 7260, isn't it? The 1330 cup size might be a little small on a Dana?

 

[Suregrip391]

1330 was the original size on all 66/67 Dana cars. Beyond 67, I do not remember.

 

[Fran Blacker]

MO 7260 u-joints never came on a mopar car Dana 60. The Dana 60 came with 1330 u-joint 66/67 and in 68 to 72 7290 u-joints. Any pictures, have you taken anything apart. Think your looking for the wrong yoke. All were 29 spline MO.

 

[A-merry-can]

MO 7260 u-joints never came on a mopar car Dana 60. The Dana 60 came with 1330 u-joint 66/67 and in 68 to 72 7290 u-joints. Any pictures, have you taken anything apart. Think your looking for the wrong yoke. All were 29 spline MO.

Sorry, I meant 7290. Mine has 10 splines, though... the car didn't have a yoke on it when I got it. i don't really have anything I can measure off of.

 

[Fran Blacker]

Don't know if there is that combination. Maybe a 68 742 8.75 if there's any such thing? The 1330 u-jointed 10 spline I posted would work with combination 7290/1330 u-joint.

 

[A-merry-can]

I ended up going with a new 1350. Found a conversion UJ that should work.

 

[Fran Blacker]

Nice to see the resolution of a problem.