jamey
Well-Known Member
Putting a 6.1 hemi in my satellite, so here is a list of various big block and small block parts I really don't need now. Shipping is not included. I can do paypal or take a money order or pick up. Parts located in NW, PA, not far from Erie. I will be adding to and updating the list as parts are sold. Pm me for more info and and email or cell number if you want pics.
RB M1 single plane intake, $150 sale pending
b edelbrock performer rpm, was bolted to an engine but never run $200
b edelbrock street master, used in good shape $75
small block performer intake, used in good shape $100
rb holley street dominator, used in good shape $150
carter competition afb 750 cfm, needs rebuilt, $125
bigblock edelbrock vintage valve covers with edelbrock script, need blasted but in
nice shape $125
Isky bigblock ductile rockers, used in good shape, no shafts $200
383-440 1968-69 hipo exhaust manifolds, no heat riser, really clean $350
626 bigblock bellhousing, needs blasted but nice, $350
Brand new lakewood blow proof bell housing for a big block, no box, excellent $350 sale pending
b motor mallory electronic distributor, brand new $150
Couple things I really don't want to ship!!!
489 3.55 clutch style sure grip center section $550
383 big block short block, stock rebuild, .040 over, decked, rods rebuilt, nice stock engine. Really needs disassembled and cleaned. I sprayed it down with lithium grease. $550
440 cast crank long block engine, standard bore with trw domed pistons, mopar purple shaft cam (unsure of specs other than hydraulic), 346 heads (i'd would rebuild), really clean engine. $650
1967 318 2bbl and 727, still in my satellite, engine has been rebuilt stock and runs great. $500
1969 833 4 speed tranny, out of a road runner, 23 spline i would rebuild it, $350
bare 340 block, missing a couple main caps and has one motor mount bolt hole cracked on passenger side, standard bore I think it's a 1970 $350
RB M1 single plane intake, $150 sale pending
b edelbrock performer rpm, was bolted to an engine but never run $200
b edelbrock street master, used in good shape $75
small block performer intake, used in good shape $100
rb holley street dominator, used in good shape $150
carter competition afb 750 cfm, needs rebuilt, $125
bigblock edelbrock vintage valve covers with edelbrock script, need blasted but in
nice shape $125
Isky bigblock ductile rockers, used in good shape, no shafts $200
383-440 1968-69 hipo exhaust manifolds, no heat riser, really clean $350
626 bigblock bellhousing, needs blasted but nice, $350
Brand new lakewood blow proof bell housing for a big block, no box, excellent $350 sale pending
b motor mallory electronic distributor, brand new $150
Couple things I really don't want to ship!!!
489 3.55 clutch style sure grip center section $550
383 big block short block, stock rebuild, .040 over, decked, rods rebuilt, nice stock engine. Really needs disassembled and cleaned. I sprayed it down with lithium grease. $550
440 cast crank long block engine, standard bore with trw domed pistons, mopar purple shaft cam (unsure of specs other than hydraulic), 346 heads (i'd would rebuild), really clean engine. $650
1967 318 2bbl and 727, still in my satellite, engine has been rebuilt stock and runs great. $500
1969 833 4 speed tranny, out of a road runner, 23 spline i would rebuild it, $350
bare 340 block, missing a couple main caps and has one motor mount bolt hole cracked on passenger side, standard bore I think it's a 1970 $350
Last edited:
