Need a low horn in good working condition.
Thanks.
Thanks.
WTB "low" tone horn for B-body
- Thread starter Richard Cranium
- Start date
- Status
slapstickjim
Well-Known Member
I have this one, i think it came off 74 dart. but that was 30 years age, so not sure what its off of. Can test it tomorrow if it works. Is something that would work fir you?
Just a thought...
Have you put the horn in a vice and remove the adjustment screw tap the horn with a hammer then re-instal the screw and then adjust while
having it hooked up to 12v supply?
I have done this with a couple horns
Have you put the horn in a vice and remove the adjustment screw tap the horn with a hammer then re-instal the screw and then adjust while
having it hooked up to 12v supply?
I have done this with a couple horns
Haven't done that, but I'll give it a shot. Right now, it sounds sick.
slapstickjim
Well-Known Member
The low horn Posted above works. Tested it today. Not sure if that is what you want.
Thanks. Jim
Thanks. Jim
- Local time
- 2:45 PM
- Joined
- Jan 29, 2018
- Messages
- 22,914
- Reaction score
- 82,904
- Location
- Midland Ontario, Canada
Sparton or Presto ?? that is the question.. lol
Ever take one of these apart? I did once. After drilling all the rivets out and opened it up I found out that it went from a non- working horn to a non-working horn in many pieces. 
Last edited:
americasclas
Well-Known Member
How did you bench test it
slapstickjim
Well-Known Member
Set the horn on my negative terminal on my powerstroke truck. Ran a wire from horn and touched positive terminal. And horn went beep, did it like 6 times.
I also posted it on exterior parts for sale.
americasclas
Well-Known Member
Thank you
- Status
Similar threads
- Locked
- Locked
