Magnum Force leaf relocation kit Question for 66 Coronet

[Stewsta]

I am fixing to start moving the springs with a Magnum Force kit and I have a few questions about the new boxes. All of the pics I have looked at show the new boxes mounted in the frame rail and butted up against the brace thats running perpendicular to the frame rail. I marked where the existing mounting point was and there is a gap when I locate the new box on the frame rail. Is this the correct position or do I butt it up. Also, if I do butt it it up wont it move the rear end forward? thanks[

 

[benno440]

i would have to say that if there is no spacer in between the plate and the frame then it would definetly be butted up, i would suggest talking to magnumforce again either clint or ron. if it is not butted it would cause slop and start damaging the frame

- - - Updated - - -

javascriptpenPage('detail_images.asp?ProductID=3122&CurrentImage=' + document.getElementById('form3122').CurrentImage.value,560,500,1);

 

[Stewsta]

After speaking with Magnum Force i will have to add a filler or butt it and drill new holes

 

[snakeoil24]

I would not add a filler. All the thurst is on the front hanger. I woul get boxes that are long enough with extra pre drilled holes.
.