Max Wedge Heads

[poppaj]

I need another set of 64' vintage max wedge heads #518...I just sold my last set to a friend building a stocker..Now I need a set for a SS/EA motor I have to build..anyone have a set to sell?

 

[jfro]

Max Wedge Head

I just went through looking for a set of heads. I blew my car up last summer. Called everyone I knew & they called everyone they knew. Found one @ Indy Cyl. they wanted 1500. for one that had been repaired. All I found had been repaired. Mopar repops these heads about 1400 bare same casting #.

[email protected]

 

[SUPERSTOCKRACER]

i have a NOS SET OF 286 MAX WEDGE HEADS. MINT

 

[jfro]

i have a NOS SET OF 286 MAX WEDGE HEADS. MINT

Thanks for the response. I have already bought a set of re-pops by MoPar . I tried to remove my post but couldn't.


Thanks Again

[email protected]

Ps

I also need a set of deep well pulleys for my 64 max wedge motor. Any help here.

 

[Budnicks]

Yep them heads from Mopar Performance *P5007494 with 2.08"/1.88" or *P5249824 with 2.14"/1.81 (intake/exhaust valve sizes), are great "virgin untouched heads" a great starting point if you need new Max Wedge iron cylinder heads.... They aren't cheap but they "aren't" screwed up either, unfortunately like a bunch of the used stuff out there...