WTB Mopar Carter throttle shaft lever

[blue_stocker]

I'm in need of a Chrysler throttle shaft lever for a Carter AFB/AVS carburetor (possibly TQ carbs as well). I have an aftermarket AFB that had been butchered/damaged and the lever was removed, so I need one from a Chrysler/Dodge/Plymouth AFB/AVS to replace it.

Please Note: this part can be removed by drilling the 'crimped' end of the shaft but do not drill the throttle arm as it has a broached rectangular hole that aligns the lever in the proper position to the shaft operation, see the pictures attached. If you have something please PM me here and thanks in advance.

 

[Rishi]

To clarify, you seek just the outer lever (sometimes stamped with Carter part number 4-1101) peened onto the end of the Primary Throttle shaft assembly?

I may have a whole throttle shaft assembly I can sell you, if interested... let me know. It would be the one common to the 1969-1970 Carter AVS Big Block family, 340, 383 and 440 carburetors, such as the "primary throttle shaft, with lever and dog assembly", with the levers (4-1127 + 4-1101) still peened to the end.

I can provide Chrysler part numbers, if needed.

 

[blue_stocker]

That's the only part I require. This is for a drag race car and I'm not disassembling the shaft/throttle blades/etc, just going to weld the new one on. Thanks for responding...wb