Need a supplier for the three-way brake line junction mounted on the diff

[Aussie Coronet]

G'day all,

I am trying to source the brake hose and brass three way connector that is mounted to the top of the axle tube. It's for an 8 1/4 of unknown parentage so I'm not sure what the diff is out of, maybe a 73 Satellite or similar?

It's currently in a 69 Coronet, drum break rear end.

I have tried Rockauto but they don't appear to have it. I'm in Australia so any supplier will have to be overseas friendly.

Cheers!

 

[65hemi]

Have you tried MegaParts?
http://www.megapartsusa.com/
They have some brass connectors that may work.
http://www.megapartsusa.com/products.asp?cat=3&pg=11

 

[dryheat]

Something like this?

 

[67 coronet]

http://www.inlinetube.com/
take a look at these guys.lots of good info on there site as well.

 

[Aussie Coronet]

Something like this?

Yeah thats very similar except mine has the bolt hole in between the outlets, I doubt it makes much of a difference though?

 

[dryheat]

That is for a 73 Satellite rear center hose ... rock auto has them ....

 

[Aussie Coronet]

Thanks for all the replies guys! I ended up taking it to a brake place and after the initial "What's it off?" question and a worried look on the blokes face when I told him, they've managed to find a replacement and I pick it up Monday.