Need help ID'ing a 318 or 360 flywheel?

[wcwilliam]

I have a flywheel I bought several years ago right around the time I traded my 318 for a 360. The a833 came with the 360 and can not remember which block I bought the flywheel for. I should play it safe and take it to a shop that knows but time is my constraint due to work. Anyways, I'm looking to pull the 360 and send it to get bored for the 408, and finally after 7 years put the 4 speed in. I'm going to put my 318 back into the 73' charger just to play with the 4 speed. I won't have the small fortune saved yet till winter for the 408, and I still wanna play. I also couldn't find anything on the numbers.

 

[Cranky]

I would say that's a neutral balance flywheel.....

 

[JedIEG]

360 Flywheels have three large 1-13/64 inch holes drilled half way through. You can't miss them.

 

[bm02tj]

If you had the bolt on weight you could use for the 360
but with no weight the 318

 

[wcwilliam]

Ok, thanks for the input. I'll bolt it on the 318 in an engine cradle and start it before stabbing it into the car. I wasn't sure if all flywheels were created equal, or if they got their balance all the same way or not. I feel good enough to go with it. I was thinking it was for the 318. Thanks all

 

[Daves69]

Maybe these folks can shed some light..............

http://www.catpep.com/warranty/Warrenty.htm