Neutral Switch Cable

[darc1722]

Anyone know where I can find a neutral switch cable for a 69 b-body with a 904? Looking to replace my 43 year old switch harness. Let me know, thanks.

 

[john.thompson068]

Can't you just make one with some wire and the proper ends crimped and wrapped in electrical tape and heat shrink? I made a new one for my car so that I could route it through the hole in the floor for the shifter cable, through the car, and out of the grommet in the firewall for a cleaner appearance.

 

[Propwash]

http://www.megapartsusa.com/proddetail.asp?prod=104%2DTRWH101

 

[john.thompson068]

So that's what it's supposed to look like. My car's wiring was all hacked up when I got it and only had one crummy wire dangling from the trans to the firewall. Currently I run three bullet connectors off of the switch on the trans; two for the reverse lights and one for the neutral safety. I soldered into a wire under the dash to power the reverse lights.