New member

[Viper2005]

New member. Glad to be in. We have a 1965 Coronet 440 convertible project. 361 automatic

 

[polywideblock]

G'day from Australia

 

[Mopar Hunter]

Welcome to FBBO!

 

[Jerry Hall]

Welcome from Alabama, post some pictures because that trim you posted pictures of looks like 66 Coronet pieces.

 

[Viper2005]

New member. Glad to be in. We have a 1965 Coronet 440 convertible project. 361 automatic

 

[HawkRod]

Welcome from PA!

 

[Dave6T4]

Welcome to FBBO from Ontario. Good luck with your 1965 Coronet convertible project. Thanks for your pictures. I once restored a similar 1964 Polara 500 convertible. I think the hardest part I had to find was a good convertible top front weather seal retainer. This intricate metal piece commonly gets rotted out by water sitting in this area. I hope yours is good, because it is not reproduced. Coincidentally, my piece that I eventually found came from Clay Kossuth in Missouri.

 

[65Bel]

 

[ckessel]

Welcome from the central coast of Cal. I have a 500 HT. In many pieces currently.

 

[HD539]

Welcome from Washington State.

 

[oldbee]

Welcome aboard from Ohio.

 

[Budnicks]

Good year & cool project, good luck

welcome to FBBO

 

[1969VAGTX]

Welcome from Fredericksburg, VA.

 

[owwwch]

Welcome from VA

 

[Fran Blacker]

Welcome from CT. Two 65 verts, nice when done.

 

[mr. b]

welcome to FBBO from Pa

 

[Charlie Brown]

Welcome to FBBO from Ontario. Good luck with your 1965 Coronet convertible project. Thanks for your pictures. I once restored a similar 1964 Polara 500 convertible. I think the hardest part I had to find was a good convertible top front weather seal retainer. This intricate metal piece commonly gets rotted out by water sitting in this area. I hope yours is good, because it is not reproduced. Coincidentally, my piece that I eventually found came from Clay Kossuth in Missouri.

Funny you should say this. When it was time to replace the original header seal, I found this.

 

[Photon440]