Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Sorry for the dumb question, but I've been grinding and wire wheeling this inner C-section for way too long and this dark discoloration just won't go away. The outer rocker needs to be welded to this. Is it OK to weld to this, or do I need to get more aggressive and get to shiny steel?
Even if you sandblast, I ALWAYS clean & grind with 120-240 disc till clean bare metal especially if Tig Welding. I use OSPHO for cleaning, made by Skybright here in Cleveland Oh.
Appreciate all the replies. I will probably give acid a try. It's a beefy hunk of steel, but I would still hate to grind off enough to remove the deeper pitting.
If you want to be safe from potential fume inhalation, you can have a small fan near you to pull the air/smoke/fumes away from you. Especially if you've cleaned the to be welded area with brake cleaner or equivalent. Heat, UV etc turns the chemicals into Phosgene gas. AKA, nerve agent. Bad news.