Now you see me, Now You Don't

[MNBiker]

Glad to hear they are working. 440-6 is correct, some of the LEDs can be installed either way. Dash lights looks nice!

 

[Photon440]

Yes, the fuel gauge reads on the low side. I may have messed it up when I removed the needle to paint the face black. It's a booger to R/R those little orange needles.

In future, you may get by without removing the needles by sliding a thin drinking straw over the needle prior to painting. Afterwards, I like to touch up the needle with this:
http://www.hipoparts.com/fluorescent-speedo-gauge-needle-restoration-paint/

Nice job on the LED lighting.

 

[themechanic]

In future, you may get by without removing the needles by sliding a thin drinking straw over the needle prior to painting. Afterwards, I like to touch up the needle with this:
http://www.hipoparts.com/fluorescent-speedo-gauge-needle-restoration-paint/

Nice job on the LED lighting.

I tried the Hi Po but didn't like the shade of orange and the red was too red. I tried to mix them but it didn't work out. So, after a good recommendation I used model paint.