OEM Forged 440 Crank value

[TexasRoadRunner68]

I sold the rods, pushrods and balancer from my 70 HP 440 block. If I build it, I would go with something newer and lighter. I had intended to keep the crank, but the buyer is also looking for one. What’s a good price for a forged 70 date crank in decent shape?


I’m not a motivated seller, but the buyer seems to want it.

 

[Runcharger]

It depends on where you are at and who needs one I suppose. Around here a standard standard needing just a polish is about the same as they were 20 years ago around $300. Any more than that and people generally just go for a new stroker crank. I've got a few I've been carting around and I don't know why.

 

[Outsider]

Stock used cranks seem to have a limited demand since there are so many aftermarket cranks available now, and strokers are so popular. Even blocks, that there are no affordable replacements, can be a tough sale. I've been scrapping more than selling lately. But, just for the trouble of storing and handling, I would say $50 to $150 for a used crank would be typical in my area.

 

[MoparRobTX]

A stock stroke 440 source forged crankshaft is $900 now. Used go from $300 to $600 on ebay.

 

[Pistol Pete]

If it hasn't been magged, the buyer is going to factor that in to reflect in an offer. An unknown crank around here brings about $100-$125.

 

[Cheapsunglasses]

Good luck, I had a 383 crank listed for $50 for 6 months and finally just let the ad expire

 

[oldkimmer]

Good luck, I had a 383 crank listed for $50 for 6 months and finally just let the ad expire

That would be good in a 400 block. Kim

 

[BCBOUND]

A stock stroke 440 source forged crankshaft is $900 now. Used go from $300 to $600 on ebay.

Ebay listing prices do NOT establish value. If it is for sale and not sold, then the listed price is what the item is NOT going for.

 

[moparedtn]

As others have stated, unless it's been to a machine shop and measured every which way
(and the results documented), well....

 

[oldkimmer]

I have sold 2 in the last few years. Both were freshly turned .010 on rods and mains. The counter weights were turned down .125 thou also. I got $400.00 usd for them each. Kim

 

[oldkimmer]

A used crank when taken to a machine shop 90% of the time needs turned. I would say $150.00 is a fair price. Kim