FOR SALE Parting 1968 coronet two door rusty back nice front

[moparmendy]

This car will be cut where you want and shipped to you if it is feasable size wise..

Please let me know what you need..

Roof is being sold as a unit with the a-pillars...price on roof is 668.70

if you want the whole car it is 1000.00

if you want a part cut, let me know and we will see if we can cut it and if we can agree on price.

Thanks for b bodies only for the posting.

 

[LarryPapa]

Are the front fenders good and how much. Larry.

 

[mopar4don]

I am interested in both rockers if they are good.

 

[moparmendy]

Are the front fenders good and how much. Larry.

front fender are 250 for the pair plus ship..where are you located?

- - - Updated - - -

I am interested in both rockers if they are good.

don, sorry rockers are shot

 

[LarryPapa]

Hi. will the fenders need any repair. I live in ESSEX Ontario Canada n8m-3A9. Larry.

 

[moparmendy]

Larry, can you see the pics of the fenders??? yes, they will need work..totally budget build fenders that need work.

- - - Updated - - -

I have been asked to price some of the parts that could potentially be cut for you.

roof 668.70
fenders 250.00 for the pair
rad support complete 150
rear regulators interior shell frame work 125 per side
upper outer quarter panel near quarter window 100 per side
complete front suspension beautiful without steering gear and pitman arm 400.00
cowl 175.00
firewall 200.00 (pickup only)
bucket seat braces, hump with console brackets great great shape 225.00
back filler panel with upper trunk lip 100
package shelf and bracing 175 (braces will need to be taken off to ship)
if you think of something else..send me a question...

 

[conteycp]

rear window corners + back filler panel

Larry, can you see the pics of the fenders??? yes, they will need work..totally budget build fenders that need work.

- - - Updated - - -

I have been asked to price some of the parts that could potentially be cut for you.

roof 668.70
fenders 250.00 for the pair
rad support complete 150
rear regulators interior shell frame work 125 per side
upper outer quarter panel near quarter window 100 per side
complete front suspension beautiful without steering gear and pitman arm 400.00
cowl 175.00
firewall 200.00 (pickup only)
bucket seat braces, hump with console brackets great great shape 225.00
back filler panel with upper trunk lip 100
package shelf and bracing 175 (braces will need to be taken off to ship)
if you think of something else..send me a question...

I would like the rear panel and the rear window corners along with the adjacent sections of the rear quarters equal to the depth of the rear filler panel

 

[moparmendy]

I am thinking 275 plus shipping unless you can hopefully pickup..where are you located..if we keep this all in one piece, shipping could be costly or very difficult...please let me know your thoughts.. I am assuming we would cut into the package tray to give you more than you need ???

 

[conteycp]

Picking up is possible ,, It would be about a 8 hour trip for me I think ,,, how clean are the window corners ? any chance for a closer picture ? I was also wondering how the floors in the passenger compartment are , I need a full floor from the fire wall to just before the rear seat platform .

 

[moparmendy]

I will get more pics and check the floors...you should let me take the roof, the k, rad support and possibly the door jams and inner quarter window area and you should take the rest back with you...foor and rear parts..pm me and give me your phone number???

 

[moparmendy]

more floor pics

lower window corners are not perfect..they could be worked with, but would need work.
I am adding more pictures of the floors
very solid front of fire wall forward..very solid from the front floors back..ending over the top of the trunk.

 

[garrett1308]

Hi mendy, Im build a 1968 roadrunner and i need a few small patches. I attatched a picture of what I need, which is a small section of the floor. Not a lot of rust on mine suprisingly. I also need a front sway bar, mines set up for one, but it's gone. PM me with what you want for the parts please. Also, if you change your mind on selling the roof as a unit, I could use those A pillars. Thanks.

 

[moparmendy]

Hi mendy, Im build a 1968 roadrunner and i need a few small patches. I attatched a picture of what I need, which is a small section of the floor. Not a lot of rust on mine suprisingly. I also need a front sway bar, mines set up for one, but it's gone. PM me with what you want for the parts please. Also, if you change your mind on selling the roof as a unit, I could use those A pillars. Thanks.
View attachment 164405

I would say 125 shipped on floor piece...would we cut the a-pillars into the cowl?? and how high up the roof? certainly willing to entertain the idea...

 

[garrett1308]

For the A pillars, Id need from where they meet the cowl up about 10 inches on both sides. I'll buy the floor section from you, as long as the under side looks as good as the top side. And if you have them, could you get me 2 dash bolts which bolt the dash down to the cowl? Thanks. I'll PM you with a number to call where we can determine the price for everything.

 

[Force28x]

You would not happen to have anything that I could patch this spot with, do you?

 

[moparmendy]

You would not happen to have anything that I could patch this spot with, do you?

mine is 1000 percent better than what you have..
I will cut this out down to the wheel well for your and ship to you for 200..paypal payment

 

[rlt builders]

Do you still have this car or any parts?

 

[wedge69]

Was this a power brake car ? Need the peddle bellcrank part.
Thanks
Tj

 

[es1758]

How much for the drivers door striker area circled in red, need shipped to 64068 Thanks

 

[moparmendy]

if I can cut right where the left red line is..85 shipped with pay pal personal..or money order..thanks and hope to help..

How much for the drivers door striker area circled in red, need shipped to 64068 Thanks

View attachment 171481