FOR SALE Parting a rough 1971 Satellite

[YY1]

Body is pretty bad.

bench seat, small block, 8 1/4, 4 wheel drum car

I'm taking the complete dash, the passenger fender and the deck lid to Don Garlits.

Almost all of the rest of the body is crap.

If anyone needs smalls, let me know and I'll check the condition.

Not separating the dash at this point.

Thanks

Pars are located in FL

Since I need a price-

I'll take $25 each for the three good side marker bezels.

 

[BeepBeepRR]

Hows the steering wheel? I have a neighbor that might want it. If the price is right.

 

[YY1]

Sorry it's got a 74 steering wheel.

 

[BeepBeepRR]

Sorry it's got a 74 steering wheel.

Thanks.. How about interior panels. doors and rear seat area panels. The car my neighbor has needs soooo much crap I have to remember in spurts. lol

 

[YY1]

The driver's door panel is crap.

I'll look at the rest.

Some of the rear may be good.

 

[BeepBeepRR]

I think the rears would be more needed. His are dry rotted and cracking... Almost powderish.

 

[6872n73]

How about the drivers side 1/4 glass if it rolls down?
and what does that driver side front fender look like?

 

[YY1]

I think the driver's quarter glass is good, and it does roll down.

DS fender has been patched and coming back out, and dented.

 

[Bb70charger500]

Can you get a pic of the front seat a how wide is it I need something for my 38 caddy .oh and how much

 

[YY1]

Standard B body bench.

Rough

 

[Bb70charger500]

I don't have one to get the width off of it . As long as the frame and cushions are good I can use it

 

[Grabbergreendream]

Rear defogger switch?
Any crazing in the amber lenses of the front side marker lights?
Do you have the grill brackets?
Also, need driprail molding if it isnt bashed anywhere.
Thanx in advance!

 

[YY1]

no defogger
lenses are crazy, very crazy
I'll check for grill brackets
driver's side drip rail has several dings

 

[6872n73]

how much for the 1/4 glass?

can you post pics of the fender?

 

[jprather]

does it have the bracket for the hood release ( the one behind the grill, )

 

[YY1]

yes, but it's outside release!

 

[jprather]

should be a pull rod the comes out under the bumper.. I need the bracket that holds it by the bottom of the bumper

 

[YY1]

yours is outside release, too?

not sure it has heater hoses or valve. heads are off

there's stuff in the trunk I haven't been through

 

[jprather]

hmm, we need time to get together

 

[kma9176]

Looking for a drivers window regulator Manual and the bonnet release bar for external release?
Regards
Kev