Parting out 62-74

[moparmarks]

Looking for a good.....in working order (no leaks)...Federal power steering pump for my 1968 Plymouth Road Runner. Has to have 3/8" outlet with the mounting hole on the back at the 1 o'clock position...not the 3 o'clock position. I think '67 and '68 were the only years for the Federal pump. Email me if you have at [email protected]. Thanks.

Sorry Rich I don't have one.
Thanks

 

[65Cornet]

Hi do you have a sb 1965 push button or cable shift 727 tranny Thanks

 

[FastFury]

1962 Sport Fury Trim and Power windows wanted

Mark,
Looking for the 1962" Sport Fury Golden Commando" Trim emblems that were on both lower front fenders
Also power window motors for a 1962 to 1964 Mopar, Part No 2252001, They are the Rectangle type

Hows 10 bucks shipped?

 

[Da Runna]

Do you have rear bumper guards for 73 Runner/Sattelite?

 

[Mike67]

Looking for the fender trim/bezel that goes around the grill off a 67 coronet? also looking for a transmission arm off a b body wiper motor... Do you have any of those??? Thanks

 

[Texas charger 73]

In need of a 73 charger grille

 

[moparmarks]

Hi do you have a sb 1965 push button or cable shift 727 tranny Thanks

Sorry I don't right now.
Also 65 has a column shift but still uses the cable. 64 was the last year for push buttons.

- - - Updated - - -

Do you have rear bumper guards for 73 Runner/Sattelite?

Sorry I don't. Have some front ones.

- - - Updated - - -

Looking for the fender trim/bezel that goes around the grill off a 67 coronet? also looking for a transmission arm off a b body wiper motor... Do you have any of those??? Thanks

Don't have the trim but might have the wiper arm. I'll check.

- - - Updated - - -

In need of a 73 charger grille

Don't have any nice ones. Have a pair that needs repairs.

 

[Jackpot50]

Looking for .960 torsion bars 41" long
B body

 

[Mopar512Guy]

1965 Satellite interior chrome wrap (around rear, headliner, front and pillars. Stock AM radio (does not need to work) Also the outside trim pieces "chrome hash marks" that are on the rear of the qtrs, think there are 7 per side mounted at a angle.

1967 Satellite hood

 

[moparmarks]

Looking for .960 torsion bars 41" long
B body

Sorry just have .880 bars right now.
Thanks

- - - Updated - - -

1965 Satellite interior chrome wrap (around rear, headliner, front and pillars. Stock AM radio (does not need to work) Also the outside trim pieces "chrome hash marks" that are on the rear of the qtrs, think there are 7 per side mounted at a angle.

1967 Satellite hood

Sorry I don't have. Sold my 65 Satellite to a friend and all the extra trim went with the car. Don't have the 67 hood either.
Thanks

 

[Eduardo]

I need lower control arms with sway bar tab for a 70 charger. Do you have any ???? $$$$
ED

 

[moparmarks]

I need lower control arms with sway bar tab for a 70 charger. Do you have any ???? $$$$
ED

Sorry I don't
Thanks

 

[Texas charger 73]

How much for the 73 grille that need repairs? A lot of repair?

 

[73SEBrougham]

Looking for inner louvered panels for 73/74 Charger SE Brougham's. Focusing on a good set of blue one. Please advise.

 

[nm9stheham]

Looking for a rear axle pumpkin assmebly from an early B-body slant six car that came with an automatic; This woudl have the smaller 8-1/4" R&P (in the 8-3/4" type axle housing) and should have a 2.93:1 gear ratio. Tnx!

 

[threewood]

Looking for a 318 Poly cast iron 4 bbl intake manifold.

 

[GaryS]

I'm looking for a set of V8 spool type motor mount towers. I have the mounts, but need the parts that are welded to the frame. They are for a custom installation in a '56 Plymouth, so only need to be tall enough to weld to.

I also need a three-groove crank pulley for a small block. It needs to be the one that is 7" in diameter, 3" deep, and without the damper rubber.

Thanks.

 

[Jbare1964]

looking for 1964 dodge polara front brake drum with hub 10x 2.5" brakes, 4 door trim and gauge cluster

 

[Migsbig]

Giving Mark a bump, he's always got good stuff!

 

[OMTWF-72SE]

Looking for a 72 Charger charcoal canister and driver side front quarter trim (continuation of hood trim)