Pump pulleys

[steve from staten island]

Im going to hold off on putting the AC compressor back on my 383. So i assume i need non AC pulleys. I believe i have the harmonic pulley,it has to groves but i need the pump pulley. Is the pump pulley for a non AC car one or two groves and does anyone have one they want toy unload?

 

[A383Wing]

you will need a 2 groove crank pulley, a single groove WP pulley, a Non-AC water pump, and correct belts to complete the change over. You may also need the non-AC alternator mounting brackets for the alternator also

 

[AMX364]

If you still plan in the future for the factory AC system, you can gut the compressor clutch and just use a bearing with the compressor pulley. Even a hybrid AC system can still use most of your pulleys. Hybrid system means aftermarket compressor and condenser with factory dash parts.

 

[chooch]

im in the middle of hooking up my factory ac but I run the car with out it for a few years, all you need is a two groove crank pulley & a standard 3" or 4'??? pump pulley & two belts, one belt does the crank, pump & alt which will be your adjustment point & the other belt does the crank & power steering pump if equipped.