QA1 Coil Over Upper Control Arm Fitment

[vance.dykes]

as much caster and camber as you want with s.p.c upper control arm

 

[Bird 426]

Here's mine, small spacer, large spacer each side, not both together. Now, you can alter things for caster if you can have someone make what you want. Not uncommon to have to stretch the control arm a little. Any cars dimensions can be off a little or from accident damage.

 

[PistolGrip6]

Here's mine, small spacer, large spacer each side, not both together. Now, you can alter things for caster if you can have someone make what you want. Not uncommon to have to stretch the control arm a little. Any cars dimensions can be off a little or from accident damage.

View attachment 1790753

Here's mine, small spacer, large spacer each side, not both together. Now, you can alter things for caster if you can have someone make what you want. Not uncommon to have to stretch the control arm a little. Any cars dimensions can be off a little or from accident damage.

View attachment 1790753

Thanks for taking the time to take a photo for me. I appreciate it. I’ve got a machining background and access to a lathe so it won’t be difficult for me to make up spacers like the ones on your car.

Tweaking and flexing them into place is an option but I can’t bring myself to alter them when I see something like this.

 

[j-c-c-62]

Not knowing what your measurements are, I'd at least make the small side 1/2 the length of the large side, so you can flip them if needed, and still be in the ballpark I would assume.

 

[PistolGrip6]

Not knowing what your measurements are, I'd at least make the small side 1/2 the length of the large side, so you can flip them if needed, and still be in the ballpark I would assume.

I’ll bust out the vernier and a gauge block set to get right down to the thousandth of inch if needed. Both driver side and passenger side look to have the exact same condition.