jeff73
Member
So I'm trying to find a radiator for my swap. called ron davis radiators and got quoted 1533.70 for one that'd match up. I thought that was kind of steep. Is that about the going rate? any suggestions on other places?
radiators
- Thread starter jeff73
- Start date
HYRDGOON
Well-Known Member
- Local time
- 11:35 AM
- Joined
- Apr 20, 2013
- Messages
- 3,374
- Reaction score
- 2,745
- Location
- Breslau, Ontario, Canada
What are you looking for? do you want something that looks "correct" or an aluminum bling? I went with Wizard Cooling and U.S. Radiator also gets a lot of positive feedback on here
You need a radiator with the in/out to match your engine. Then start looking around....I got mine on ebay with dual spal 12 inch fans and all the wiring for under 400 bucks. By the way, it's a Northern.
terzmo
Well-Known Member
I got a 3 row aluminum direct fit from Champion for 215.00.cooled my 498 stroker
usaroadrunner
Well-Known Member
modern muscle, alum rad by northern with dual fans an temp control all hardware needed. $800. real nice. got pics on my resto thread (my 70 barn find)
HYRDGOON
Well-Known Member
- Local time
- 11:35 AM
- Joined
- Apr 20, 2013
- Messages
- 3,374
- Reaction score
- 2,745
- Location
- Breslau, Ontario, Canada
You can look at this review http://www.forbbodiesonly.com/mopar...S-Radiator-Review&highlight=champion+radiator
and here's some pics of my Wizard http://www.forbbodiesonly.com/moparforum/showthread.php?60542-Wizard-Cooling-Package-Arrived-Review
and here's some pics of my Wizard http://www.forbbodiesonly.com/moparforum/showthread.php?60542-Wizard-Cooling-Package-Arrived-Review
clemul
Well-Known Member
Call and speak to the guys at Glen-Ray Radiators,they are knowledgeable and can provide you with exactly what you need. They are second to none in terms of quality and customer service...I can't say enough good things about them.
http://www.restorationradiators.com/
http://www.restorationradiators.com/
RealWing
Active Member
Wizard Cooling Rad
Mine is a Wizard as well, with inlet/outlets on the passenger side for my 6.1 going into my '69 Cuda with Maradyne fans at 1565 cfm each. I am installing AC, so bigger fans were needed to pull the air through the condenser and the rad.
Mine is a Wizard as well, with inlet/outlets on the passenger side for my 6.1 going into my '69 Cuda with Maradyne fans at 1565 cfm each. I am installing AC, so bigger fans were needed to pull the air through the condenser and the rad.
HYRDGOON
Well-Known Member
- Local time
- 11:35 AM
- Joined
- Apr 20, 2013
- Messages
- 3,374
- Reaction score
- 2,745
- Location
- Breslau, Ontario, Canada
Darius
Well-Known Member
I used the radiator from the car I got the engine from. I was not out for show and I figured if it worked there it would work in mine. Fit just fine and everything lined up correct
kb67mopar
Well-Known Member
jlukas
Active Member
Does anyone have a part number for a 22" core radiator with inlet and outlet on passenger side that would work for a 6.1 Hemi? My 6.1 will be going into a 1966 Coronet. It seems to me that an LS swap radiator might also work and avoid the cost of a custom build radiator. Do any Jeeps use a 22" core opening? There are quite a few hemi swap parts for Jeeps out there.
DanbMaxie
Active Member
I second the guys at Glen-ray radiator. They are just flat out awesome. I replaced the radiator in my 63 Max with with one of their units, perfect fit,perfect delivery. They even cheated it forward a bit in the brackets.
Modern Muscle
Active Member
Here is a link to the one we make
http://www.modernmuscleperformance.com/product/Radiator-57L-61L-64L-HEMI
http://www.modernmuscleperformance.com/product/Radiator-57L-61L-64L-HEMI
jlukas
Active Member
That one is apparently only for a 26" core support, right?
Modern Muscle
Active Member
no, great thing about custom is we can make it fit just about anything
Similar threads
