roller rockers

[KB9GIB]

Hi, Looking for some info on comp cams roller tip rocker arms. I put them on my 440 and they hit the valve cover any way I can run stock valve covers. The cam is comc 292/509.Thanks for any info KB9GIB

 

[texas69bee]

Which ones are you running. I'm using http://www.compperformancegroupstor...ory_Code=ChryslerUltaProMagnumShaftRockerArms and no problems with stock valve covers.

 

[forphorty]

Hitting the baffles I presume? Mark where they're hitting and clearance the baffles with a ball peen hammer or something.

 

[Vermont Rock]

I had the same problem with my stock covers with the Edelbrock 7194 cam and 440 Source roller rockers. (these are kinda big ) Only took a very little indentation from a round punch or ball peen hammer to get the needed clearance.
The alternative is to use "tall " covers, available from several suppliers.