Saginaw pump housing with 2 returns?

[Black_Sheep]

I have heard of them but never personally seen one. Do they actually exist? My Google-Fu must be weak because I can’t find one. I’m adding hydro-boost to the GTX and I’d rather not run a TEE in the return if it can be avoided…

 

[Kern Dog]

I got one from a wrecked 1990s Chevy flatbed with a 454.

 

[Black_Sheep]

I got one from a wrecked 1990s Chevy flatbed with a 454.

View attachment 1791377

View attachment 1791378

Where does the 2nd return enter the housing?

I’ve also thought about adding an AN bulkhead fitting to the existing housing’s “neck”, is there any reason that wouldn’t work?

 

[Kern Dog]

Where does the 2nd return enter the housing?

 

[Black_Sheep]

View attachment 1791393

I mistakenly thought that was the pressure line. I should have known better, it would be crimped not held on with a hose clamp…

 

[nitro_rat]

There are several different versions with two returns. There are the "canned ham" shaped ones, rounder ones with integral reservoir, and round ones for remote reservoir...

 

[MCODECUDA]

Caravans used them I had a new one at some point but I think that I may have sold it at some point.

 

[Crash520]

I have heard of them but never personally seen one. Do they actually exist? My Google-Fu must be weak because I can’t find one. I’m adding hydro-boost to the GTX and I’d rather not run a TEE in the return if it can be avoided…

I bought a pump with two returns from Borgenson, check their website

 

[fesser]

I kept this off a motorhome I parted (for a GV overdrive). Was bolted to a 440. Not sure if it is a saginaw because I know diddly squat about power steering pumps.

 

[Black_Sheep]

It looks like a Saginaw pump…

 

[Black_Sheep]

I bought a pump with two returns from Borgenson, check their website

I ordered a housing from them this morning, thanks...