• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Scott Drake magnums ??

Richie

Well-Known Member
Local time
6:52 PM
Joined
Jul 29, 2009
Messages
139
Reaction score
86
Location
Kelowna BC Canada
Hi everybody

15x7 4 1/2" back space 4.25 rims will work on a Mopar right? Just because it's an all Ford site it's all the same.
 
15x7 4.25BS with 225/70R15 Mickey's work great. Need the Mopar centre caps that they sell to make them look proper.

Had to change my wheel studs as the Drake's are deep. Get the conical lug nuts that they sell for these wheels. This is what they look like on mine.

IMG_1371 Large.png
IMG_1370 Large.png


IMG_1325 Large.png
IMG_1326 Large.png
 
I'll just show a pic of the ones I ordered. They just look like the other ones to me Boyd Coddington's, Wheel Vintiques. I was going to get the Coddington ones but they replied no shipping to Canada for now. Before that I almost got the ones at JEGS but over $1100 for just two wheels to get up here :elmer:

s-l1600.jpg
 
Last edited:
From the picture, those are the chrome/steel Magnum repro's. Hopefully a decent brand where the chrome will hold up well.

Looking at the photo only it would seem they should work out fine with your stock wheel studs, they are not deep like the one piece aluminum's from Drake.

When you get them show us how they look!
 
From the picture, those are the chrome/steel Magnum repro's. Hopefully a decent brand where the chrome will hold up well.

Looking at the photo only it would seem they should work out fine with your stock wheel studs, they are not deep like the one piece aluminum's from Drake.

When you get them show us how they look!
I bought speciality brand magnums about 2007 chrome/steel. They held up decent over the years, moisture got to them here in the NW.
 
From the picture, those are the chrome/steel Magnum repro's. Hopefully a decent brand where the chrome will hold up well.

Looking at the photo only it would seem they should work out fine with your stock wheel studs, they are not deep like the one piece aluminum's from Drake.

When you get them show us how they look!
I will do that Don
 
Chrome wheels need to be looked after, they are also rather heavy. My advice don't leave them dirty or wet or you will get rust spots very quickly, especially around the rim.
Keep the chrome polished.
 
From the picture, those are the chrome/steel Magnum repro's. Hopefully a decent brand where the chrome will hold up well.

Looking at the photo only it would seem they should work out fine with your stock wheel studs, they are not deep like the one piece aluminum's from Drake.

When you get them show us how they look!
DSCF2610.JPG
DSCF2606.JPG


They look just fine:thumbsup:
 
Mounted with the center caps. Sorry for the mess but my place is so full of car parts that the guys at work tell me "You're going to roll out of bed one night Rich because there's about a ton of parts in the front of that trailer and it's going to take a dive one night" :lol:


Magnums.JPG
 
I have a set of 15 x 7 with the Mopar center caps added on my other Charger.

20200919_150659.jpg


20200919_150810.jpg
 
Auto Transport Service
Back
Top