Six pack setup

[Nitrofish1]

Man I LOVE that 6 pack scoop ! It just Screams NASTY !!

its also coming with an extra hood, however im not quite sure what ill be doing with that if anything :/ despite my friends saying "yeah no hood and tunnel ram intake!" lol, might as well blow the thing if i was gonna go that route but im not.

long story short, someone needs to make it so that there's less options for me to choose from, would make this a whole lot easier.

 

[rumblefish360]

IF it were "I" doing this project, then I would go with my last suggestion.

500 cube engine (or so either way up or down a few cubes won't kill you.)
Heads of your choice
6 pack
Headers at 2-1/8 into a 3 inch exhaust to the bumper
Style of cam your choice. Hyd. Solid, roller, you think about it. But....
Cam in the intakes power range, 2500 - 6500 and then add as much lift as the heads flow. If you can not find it off the shelf, just call a grinder up and ask them to help you out. A custom is affordable and at best only a few dollars more than a off the shelf.
Head flow stalls at or after .550. Cam lift to .550.
I'd make use of roller rockers on top.

This basic and simple set up will make for a great street killer package without busting a brain cell in deep thought and without worry.

 

[Nitrofish1]

IF it were "I" doing this project, then I would go with my last suggestion.

500 cube engine (or so either way up or down a few cubes won't kill you.)
Heads of your choice
6 pack
Headers at 2-1/8 into a 3 inch exhaust to the bumper
Style of cam your choice. Hyd. Solid, roller, you think about it. But....
Cam in the intakes power range, 2500 - 6500 and then add as much lift as the heads flow. If you can not find it off the shelf, just call a grinder up and ask them to help you out. A custom is affordable and at best only a few dollars more than a off the shelf.
Head flow stalls at or after .550. Cam lift to .550.
I'd make use of roller rockers on top.

This basic and simple set up will make for a great street killer package without busting a brain cell in deep thought and without worry.

I'm gonna make a note of this, thanks. A set of victor eddy heads would be great, and I found a set of Harland sharp roller rockers to match. There's still other little bits I'll have to figure out but I got plenty of time

 

[jonnyp85]

here is a complete set of six pack carbs im selling on ebay
http://www.ebay.com/itm/1969-1970-C...Parts_Accessories&hash=item19fa9fd661&vxp=mtr