Six Pack Upper Fuel Line to 3/8" Hose Barb - Which One?

[PurpleBeeper]

I'm confused. I'm trying to run a 3/8" flexible hose fuel line up to my six pack stock/steel upper fuel lines. Right now I've got a short piece of 3/8" fuel line and the fuel line fitting with the hose clamped on. I'd like to replace that with a 3/8" hose barb.....so where do I get a fitting that has the inverted flare on the tail end? THANK YOU!

 

[65-440]

I'm confused. I'm trying to run a 3/8" flexible hose fuel line up to my six pack stock/steel upper fuel lines. Right now I've got a short piece of 3/8" fuel line and the fuel line fitting with the hose clamped on. I'd like to replace that with a 3/8" hose barb.....so where do I get a fitting that has the inverted flare on the tail end? THANK YOU!

Like this?
https://shop.advanceautoparts.com/p...VCLLICh3bbwBgEAQYAiABEgLDAvD_BwE&gclsrc=aw.ds

 

[mr340]

What you need is 5/16 inverted flare to 3/8 hose barb. Try Amazon or your local auto parts
https://www.google.com/search?q=5/1...X-IAfAGkgEEMTAuMZgBAKABAbABCg&sclient=gws-wiz

 

[Daves69]

??
Fuel Hose Fitting - Inverted Flare Male Connector - 5/16 In. X 3/8 In. Tube 785-404D: Advance Auto Parts

 

[PurpleBeeper]

Thanks to all of you! I couldn't figure out what size the inverted flare is. Much appreciated!