small block parts for sale

[pistol_grip_polara]

I have numerous small block parts for sale. Not much on the performance side, lots of internals. I have a few 318s and a few 360's for parts. I can get casting numbers if needed. All prices are best offer plus shipping. Just trying to clean up stuff I am not going to use and dont want to scrap it.

I know I have 2 complete 318's. 2 904 transmission cores. Couple 360-727 torque converters.

I am stripping down a 360 right now. It is all standard parts, good crank, to my knowledge it has never been turned but as soon as i pull it apart i will look at the bearings. It is currently running but I need the block.

Also have a set of .030 of 360 pistons. There are 8 wrist pins, 7 good pistons and 1 bad one.

I do have a 1973 340 4bbl intake. I can double check the casting date, it is a non-smogger.

I have an isky cam and lifter set.

NO OTHER 340 PARTS AND NO 360 CAR OIL PANS.

Have an older edelbrock dual plane intake.

Any interest at all, just let me know. Im sure I have other stuff, just ask.

I also have a shortblock '67 383 w/heads and a 2bbl intake and a complete 440 engine.

 

[pistol_grip_polara]

some information that was asked by a few, the edelbrock intake is the sp2-p spread bore, non smogger.
(guess it is more of mileage/economy intake then a performance one)

The 340 intake has a 7-27-72 date code on it.

The isky cam has
XSSM
iskenderian
7 112
256 HYD
SUPERCAM
3901

stamped on the back of it.

 

[Abbott]

Whacha got for 360's?

 

[pistol_grip_polara]

Whacha got for 360's?

At the moment, all i have for 360's is a '72 block and standard crank. Block is currently .040 over and would need to go .060... May have a later 360 out of a van that is a runner but all standard and stock.... Some other misc. pieces but not much for blocks.

 

[CarKnockerJim]

whats the price w shipping for the cam and lifter set??