Sold Race car, Still have B-1 Heads

[txracer]

Sold my race car. Never built a shortblock for these heads. So I have a set of B-1 Original Heads and cast aluminum valve covers, roller rockers, 15 pushrods(lost one),single 4 B-1 intake with dominator flange, Head bolts and valley plate.
The guy i got them from bolted them on a 500 inch motor. Then he got a divorce and never finished car and sold everything. I got the b-1's .

I have had these in my closet for 12 years now. Need to see what everyone thinks they are worth? Have been debating on selling them to start my Road Runner restoration! I have been on the short end of the stick to many times!!!
Honest opinion what they are worth please

Thanks for any input!

 

[72Satellite440]

B-1 Heads Pricesheet
Original B-1 Head
This high output aluminum race cylinder head for B and RB Mopar engines is engineered for all-out performance.

The Original B1 head features raised ports that offer huge flow increases over cast iron head. The 2.300 inch intake valves and the 1.780 exhaust valves have been repositioned to the bore center-line for greater performance gain. The raised exhaust ports will accept a stock header flange. This head also features raised and angled spark plug locations for more complete combustion and deck thickness that provide extra strength. The head can be flat milled to 47 cc or angle milled to 37cc.

Original B-1 Heads Pricesheet
$2250.00 Pr.



Since they cost 2250 I think they are worth about the same

 

[SUPERSTOCKRACER]

Sold my race car. Never built a shortblock for these heads. So I have a set of B-1 Original Heads and cast aluminum valve covers, roller rockers, 15 pushrods(lost one),single 4 B-1 intake with dominator flange, Head bolts and valley plate.
The guy i got them from bolted them on a 500 inch motor. Then he got a divorce and never finished car and sold everything. I got the b-1's .

I have had these in my closet for 12 years now. Need to see what everyone thinks they are worth? Have been debating on selling them to start my Road Runner restoration! I have been on the short end of the stick to many times!!!
Honest opinion what they are worth please

Thanks for any input!

Are the heads ported?
The roller rockers are basically junk.
You should be able to get $2000.00 for everything.
Let me know if you plan on selling everything.

 

[hemi472]

i am interested in the heads sent me a email to [email protected] thanks Ed