Spring hanger bolt pattern

[ChargerST]

Does anyone have the bolt pattern for the front spring hanger for a 68-70 Charger? I assume 66-70 B-body should all have the same pattern..

Thanks!

 

[451Mopar]

I don't have a pattern, but it is not rectangular. The spacing between the upper and lower holes is different as I found out trying to make some wheel stands for moving the body around without the rear end installed. I'm sure someone here will have the answer in a day or so.

 

[Jeff Peterson]

Does anyone have the bolt pattern for the front spring hanger for a 68-70 Charger? I assume 66-70 B-body should all have the same pattern..

Thanks!

Same pattern

 

[Dave6T4]

Mancini's sells a stiffener plate for that area, with the right bolt pattern on it. Same pattern for early B-bodies as well.

 

[ChargerST]

I found the dimensions here - at least sort of as the picture resolutions is quite bad. I can read 1.5" and 1.75" distance between left and right but not how far apart upper and lower bolts are ..

@rbkt65 can you help?

please help identify these spring hangers

 

[BSB67]

 

[ChargerST]

Great! That confirms the 1.5" and 1.75". Missing length is 3 3/8" then. Thank you!