mightymopar
Well-Known Member
Can new lifters be put in a SB 318 without taking off the heads?
stupid question for today
- Thread starter mightymopar
- Start date
D575
Well-Known Member
- Local time
- 11:09 AM
- Joined
- Feb 22, 2012
- Messages
- 671
- Reaction score
- 213
- Location
- High Desert, Northern Nevada.
yes
Hemi Rebel
Well-Known Member
- Local time
- 12:09 PM
- Joined
- Apr 22, 2012
- Messages
- 4,170
- Reaction score
- 1,920
- Location
- Where the outlaws live
Yes. The intake has to come off. I think. I don't mess with small blocks that much. Cant remember if there is enough room in the head to pull the lifterw through.
Jonnyuma
Well-Known Member
- Local time
- 11:09 AM
- Joined
- Nov 15, 2010
- Messages
- 824
- Reaction score
- 164
That's not a stupid question.
Yes, intake has to come off. Rockers and shafts will have to come out to get the pushrods out, then the lifters can come out. If they're not varnished-up a fairly strong magnet will be helpful.
Make sure the pushrods go back into thier original location. You can buy a valvetrain organizer, but a shoebox lid or something similar will work too.
Yes, intake has to come off. Rockers and shafts will have to come out to get the pushrods out, then the lifters can come out. If they're not varnished-up a fairly strong magnet will be helpful.
Make sure the pushrods go back into thier original location. You can buy a valvetrain organizer, but a shoebox lid or something similar will work too.
terzmo
Well-Known Member
X2...rockers must come off
Similar threads
