• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Tailpipe with dana 60

DreRacing

Member
Local time
2:44 AM
Joined
Aug 18, 2021
Messages
22
Reaction score
33
Location
Norway
I am googeling the hell out of going for the RMS og Gerst suspension on my car.
I also want a dana 60.
Then I read this in RMS pages

Choose rear axle type you'll be using - 8.75/ford 9 allows most 3" tailpipes, Dana 60 will not allow tailpipes

Wtf does that mean? That I dont have room for 3" exhaust with the dana 60? why?

 
I am googeling the hell out of going for the RMS og Gerst suspension on my car.
I also want a dana 60.
Then I read this in RMS pages

Choose rear axle type you'll be using - 8.75/ford 9 allows most 3" tailpipes, Dana 60 will not allow tailpipes

Wtf does that mean? That I dont have room for 3" exhaust with the dana 60? why?
I don't see that, the Dana axle tubes are the same as a 8 3/4.
 
Bullhockey

Ive done a few cars with Danas and 3" exhaust
 
I am googeling the hell out of going for the RMS og Gerst suspension on my car.
I also want a dana 60.
Then I read this in RMS pages

Choose rear axle type you'll be using - 8.75/ford 9 allows most 3" tailpipes, Dana 60 will not allow tailpipes

Wtf does that mean? That I dont have room for 3" exhaust with the dana 60? why?
I don't know what they mean by that but give them a call. The owner himself will most likely get on the phone with you and go over it. One of those rare companies that actually cares about customer service.
 
Ok I will call them. I can´t see why tailpipes won´t work with dana60 :wtf:
 
I read somewhere that it has to do with the four link set up and a coil overs.
 
Coil overs look almost vertical. Right where tailpipes go. My 65 Dodge with TTI 3" tail pipes.

1965 Dodge 006.JPG
 
Auto Transport Service
Back
Top