throttle shaft bushings

[mac]

anyone have a source for a bushing kit for the 2300 series carbs? have what i consider to be too much movement on the throttle shaft. trying to fix idle problems.

 

[Demonic]

I don't know other than the little teflon curly-Q things in the Holley kits. If I had that issue, I'd just send them to Woodruff or someone similar that has the jigs and tools for throttle shafts. Staked screws require attention to detail.

 

[Fran Blacker]

anyone have a source for a bushing kit for the 2300 series carbs? have what i consider to be too much movement on the throttle shaft. trying to fix idle problems.

Woodruff Carbs did several Holley 4 barrel bases very reasonable, week turn around. Ask doesn't hurt.

 

[1968rt]

https://www.ebay.com/itm/232134063156?hash=item360c44b434:g:2R4AAOSwxZ9anD~7 I did my 2300s with the kit. Buy the nylon bushings also. You also need to remove the caps on the end carb idle screws.

 

[mac]

https://www.ebay.com/itm/232134063156?hash=item360c44b434:g:2R4AAOSwxZ9anD~7 I did my 2300s with the kit. Buy the nylon bushings also. You also need to remove the caps on the end carb idle screws.

the caps on the idle mixture screws are already removed. what are the nylon bushings you mentioned?

 

[F6A12]

Chicago Carburetor

Got everything I needed from here yesterday.