Turn signal lever screw
- Thread starter SMS68
- Start date
- Local time
- 3:45 AM
- Joined
- Feb 22, 2013
- Messages
- 3,908
- Reaction score
- 5,067
- Location
- The Red Anvil Dog House
The column on my 68 is currently wide open. I'll make a note to go out and measure and take a couple of pics tomorrow.
I think they are the same at least through '72. Have you checked online for a replacement?
I think they are the same at least through '72. Have you checked online for a replacement?
J-Code68
Member
The screw is a 8-32, 1-1/2" long.
- Local time
- 3:45 AM
- Joined
- Feb 22, 2013
- Messages
- 3,908
- Reaction score
- 5,067
- Location
- The Red Anvil Dog House
Thanks J-Code, you saved me popping mine out. Looks like you have plenty.
Doesn't the original have a smooth top shoulder on it though? Not full threads?
I'll give myself a sanity check tomorrow.
J-Code68
Member
The screws in the photo are all originals.
If you start a wanted thread someone may have a used one for you.
- Local time
- 3:45 AM
- Joined
- Feb 22, 2013
- Messages
- 3,908
- Reaction score
- 5,067
- Location
- The Red Anvil Dog House
Yep, those look like real deal to me. Where the hell did get all of those?
Kind of an obscure part.
J-Code68
Member
I restore steering columns.. lol
- Local time
- 3:45 AM
- Joined
- Feb 22, 2013
- Messages
- 3,908
- Reaction score
- 5,067
- Location
- The Red Anvil Dog House
That's great but it still doesn't answer my question. Looks like you have at least a gross there. One per column, that's allot of columns.
J-Code68
Member
I buy a lot of cores and have bought several drawers full of levers and components at salvage yards. I've also been doing them for about 20 years.
All you would need to do is start a parts wanted thread or better yet, send J-Code68 a pm and ask him if he could provide you with a screw.
SMS68
Well-Known Member
Thanks. I’ve been communicating with him via PM over the past few days…
Similar threads
