Underhood harness?

[P Dubya]

https://www.classicindustries.com/p...VWF1yCh2nRAHKEAQYBSABEgKFq_D_BwE&gclsrc=aw.ds

I may be looking into replacing the entire harness from the bulkhead fitting for the starting circuit. Has anybody used these harnesses and what is your opinion? Other options?

 

[pnora]

I would buy one here. Looks like you were getting a harness modified for an ECU 318 engine. Engine Wiring Harness With ECU 1968-69 B-Body Small Block, Engine Harness ECU B-Body, 104-EWH119E Reproduction, NOS and Used Mopar Muscle Car Parts

 

[Bird 426]

With that type harness on my '69 Dart, I had to change the ballast resister, voltage regulator and alternator, and of course, electronic dist and ign module.

 

[pnora]

With that type harness on my '69 Dart, I had to change the ballast resister, voltage regulator and alternator, and of course, electronic dist and ign module.

Depends on what you order. The two shown should be to convert ignition only which is automatically needing an ECU, dizzy, and ballast. You do not need the alternator or regulator. Looking at both images neither show the electronic regulator plug. Myself I would order a harness to do both.

 

[Bird 426]

Just saying when I ordered my conversion, alt went to the square back alt from the round back. Different voltage regulator, 4 pole ballast. That was the conversion. Guess he can find out when he gets his. My harness conversion was M&H.