WTB Wanted: OE/NOS Fuel Tank Gauge Sending Unit for ‘68 Coronet w/ 440 cu.in. HP

[piver]

Mopar Part Number 3004180 (3/8”, I think), for my ‘68 Coronet R/T. Looking for original part, not a reproduction. Thanks!

 

[Road Grabber]

Mopar Part Number 3004180 (3/8”, I think), for my ‘68 Coronet R/T. Looking for original part, not a reproduction. Thanks!

Would you happen to know which carb and number?

 

[piver]

Would you happen to know which carb and number?

Mine is stock for ‘68 Coronet R/T: Carter 4bbl. for 440cu.in. Auto. w/o A/Cond.; Mfg. #4429S

 

[Sixpactogo]

Mopar Part Number 3004180 (3/8”, I think), for my ‘68 Coronet R/T. Looking for original part, not a reproduction. Thanks!

That is the number that comes up in my parts book. Should have the 3/8" outlet and 1/4" return nipple.
Part number 3004182 would have the 5/16 outlet with no return nipple.

 

[piver]

That is the number that comes up in my parts book. Should have the 3/8" outlet and 1/4" return nipple.
Part number 3004182 would have the 5/16 outlet with no return nipple.

Well, I found a Sending Unit that has 3/8" Outlet and 1/4" Return. Came from Doctor Diff yesterday. Will try it out, but keep one eye out here for any OE/ NOS out there (preferably getting that vs. a reproduction).

 

[Road Grabber]

Instrument Specialties is rebuilding mine. If you want to go that route.

 

[Road Grabber]

I do have a sending unit. I kept one in case I wanted to restore one. 3/8 inlet and 1/4 vent.

$50