Washer nozzles

[eastyorker]

Just piecing my '69 Runner back together and found out I am missing the washer nozzles and the hoses. I have the fluid bottle and motor.

Does anyone have pictures of the mounting and what these look like?

Thanks

 

[Propwash]

Here's what the look like......

http://www.megapartsusa.com/proddetail.asp?prod=102%2DWWN05

They mount onto the cowl underneath where the rear of the hood rests when shut. look for the two nickel size holes..They each mount in with two sheetmetal type screws.

Good luck!

 

[eastyorker]

Thanks! Hopefully I can find them locally. Any Canadian sellers on here?

 

[Bats5]

Just piecing my '69 Runner back together and found out I am missing the washer nozzles and the hoses. I have the fluid bottle and motor.

Does anyone have pictures of the mounting and what these look like?

Thanks

Hello Eastyorker. i have been searching the site, as i have the same issue, my washer nozzles are missing on my 69 Satellite. Do you have pictures of them installed? i am having the worst time figuring it out. i was hoping to attend Moparfest this year to see examples, but had a conflict with kids sports.

 

[dadsbee]

An 11 year old thread and the OP hasn't been on here in 8 years. We have a restoration section with numerous threads that will show what you seek.

 

[Bats5]

An 11 year old thread and the OP hasn't been on here in 8 years. We have a restoration section with numerous threads that will show what you seek.

Understood.. i have searched the site and the internet pretty well, and not seen a picture. his status shows he is active, but totally took a long shot for a response.

 

[69B7RR]

Hello Eastyorker. i have been searching the site, as i have the same issue, my washer nozzles are missing on my 69 Satellite. Do you have pictures of them installed? i am having the worst time figuring it out. i was hoping to attend Moparfest this year to see examples, but had a conflict with kids sports.

Been helped many times by others with stuff like this on the forum. Hope this helps you. These are the nozzles & clips from my 69RR. They attach with (7) #10-14x .50 lg pan head Phillips screws. If I recall correctly, the original rubber hoses are ribbed on one half side & are two different sizes. Heard a while back that Frank Badelson might sell the correct hose...jim

 

[Geetex]

Hello Eastyorker. i have been searching the site, as i have the same issue, my washer nozzles are missing on my 69 Satellite. Do you have pictures of them installed? i am having the worst time figuring it out. i was hoping to attend Moparfest this year to see examples, but had a conflict with kids sports.

You can sift through one or both of these threads and probably find what you're looking for and so much more. One's a Dodge, but a lot of stuff crosses over to Plymouth. Both of these are incredible sources of information.
For the Love for my Father, My 69 GTX Restoration
1969 Dodge Super Bee Coupe Restoration

 

[mr. b]

I got the whole kit from Kramer Automotive specialties it has everything you need also comes with new bottle and pump

 

[Bats5]

Been helped many times by others with stuff like this on the forum. Hope this helps you. These are the nozzles & clips from my 69RR. They attach with (7) #10-14x .50 lg pan head Phillips screws. If I recall correctly, the original rubber hoses are ribbed on one half side & are two different sizes. Heard a while back that Frank Badelson might sell the correct hose...jim

View attachment 1517072

thank you this is very helpful.

 

[Bats5]

You can sift through one or both of these threads and probably find what you're looking for and so much more. One's a Dodge, but a lot of stuff crosses over to Plymouth. Both of these are incredible sources of information.
For the Love for my Father, My 69 GTX Restoration
1969 Dodge Super Bee Coupe Restoration

thank you for the links, i will look through. appreciate the help.

 

[Bats5]

I got the whole kit from Kramer Automotive specialties it has everything you need also comes with new bottle and pump

thank you, i will check out the Kramer website