What screw do I need (68 Charger)

[APachon71RN]

I’ve got a 68 Charger and I realized that my turn signal bezels (both sides) are missing their respective retaining screws. Any help would be greatly appreciated.

~Andy

 

[APachon71RN]

This is my Charger

 

[moparnation74]

You will need a screw and the j clip. RT specialties will have what you need.

http://www.rtspecialties.net/

 

[69Bee]

If you are referring to the fact that the lens has a hole there, it is there to gain access to the screw for the housing to valence attachment. What you have there is proper and correct.

 

[APachon71RN]

Thank you all for taking the time to respond to my post.

 

[67440chrg]

Nice car the white letters and black wheels look good!

 

[APachon71RN]

What is the screw / bolt that attaches the bar above each front valance light bezel to the valance above? I’m missing them on both sides.

If you are referring to the fact that the lens has a hole there, it is there to gain access to the screw for the housing to valence attachment. What you have there is proper and correct.

 

[moparnation74]

What is the screw / bolt that attaches the bar above each front valance light bezel to the valance above? I’m missing them on both sides. View attachment 822968

I posted you the link as to where you can get them from.

 

[APachon71RN]

Thanks a bunch. She’s a work in progress but an absolute blast to drive.

Nice car the white letters and black wheels look good!

 

[APachon71RN]

I was hoping you or someone might know the specifics of that bolt/screw so I could hit a local fastener company.

I posted you the link as to where you can get them from.

 

[APachon71RN]