What wheel stud size?

[SandDiesel]

Posted this in the tires section and didn't get any info over the weekend and will be ordering tomorrow. If any of you can help I appreciate it.

"Summit has 1/2" x 20 if that's the right thread count. Any idea what length is standard for the front and back? Also what length are some of you running in back with the steelies that are much longer for that S/S look? Thanks guys."

 

[1badgtx]

Yep it,s correct..
Petty Blue 67 gTX

 

[SandDiesel]

Thanks, any idea what length they need to be? They have quite a few.

 

[1badgtx]

The ones I have the threads are 1 inch long...I,m just measuring the thread not the shoulder...
Petty Blue 67 GTX

 

[64BEL]

I'm running 1/2" x 20 - 3" long with my cop steels on the back.

 

[1badgtx]

I,m runnin weld race lites on my GTX
Petty Blue 67 GTX

 

[SandDiesel]

Thanks, but just noticed they also have the square base pressed fit and the knurled press fit. Doesn't help when there's 100 on the page to choose from. Using the yr/make/model they only show A body 7/16's. Anyone make a p/n recommendation off the Summit page. Going all "righty tighty" for all four corners. Thanks again.

http://www.summitracing.com/search/...ds-Washers/Part-Type/Wheel-Studs/?Ns=Rank|Asc

 

[1badgtx]

knurled is what I bought..I had 4 wheel drum,they were the same front and rear..You probably should pop one out to make sure you get the right ones..
Petty Blue 67 GTX