• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Whats everyone working on?

Live from my driveway.
image.jpg
 
Current garage projects this week

Building a 512 for my dads dart

E9C1AB3C-25C7-484E-9BCB-93A6B5870B7F.jpeg
0DACA41C-F602-47B2-BA74-59627C3BD8B5.jpeg
D6C9FA2B-AD63-4556-8398-54AA043CEA72.jpeg


And built and tuning this Dominator for my buddy’s Dart.

1907B316-F1BD-4C37-BAAA-48374D1CE6D5.jpeg
34AEC401-74A5-491C-B538-02044BDED597.jpeg

 
New car for me, just over a week and a half ago, wasn't planning any major work, until this happened:
IMG_1066.jpeg



That was a nice stockish 383, seller made it right and a 451 stroker showed up yesterday so I spent today putting it in. Heck, I needed something to do in the middle of a lockdown.
 
I just finished my new shop after almost 2 years...32'W x 48' Long with 14' ceilings, with a 16'W x12'H front door and a 11'Wx12'H rear door.

7f0B9TJh.jpg


ChCqzrhh.jpg


My 68 Chrysler T/C wagon tucked away in it's new home after almost 5 years of being a storage facility and work bench.

Cz3n9Pmh.jpg


d3Nt0Cdh.jpg
 
This is my 1969 Coronet R/T I bought in 1999 as I was reminded of two weeks ago. I bought from a guy in North Hollywood off ebay fro 2800. Incomplete car, but rust was not as bad as midwest cars, and that was all the money I had. My daughter is now 20 and has warned me she wants this ready for her wedding (no boyfriend at this time). I replaced the trunk floors, the trunk extensions, and the lower rear quarters by 2003 or so. Since then I replaced the front inner fender where the battery sets, and am working on installing the chassis stiffening parts install from us car tool. I bought a rotisserie about 3 months ago, and have gotten more work done in the 5 weeks since I got it on the spinner then in the last 10 years for sure. I bought the rotisserie because I was tired of laying on my back and trying to weld, and wanted to be able to do better work installing the parts on the underside. Should have bought one years ago. I will get a more pictures and descriptions going on the projects page.

Stiffening Installation 5-8-2020.jpg
 
Here is my helper on the day we got the car on to the rotisserie. 12 years old, and likes cars but not dirty hands. Car is an original R/T, and is originally a white car. Plan was to make it white again, but after 20 years of grief for having a white car, (and the paint I bought going bad) I gave in and bought R6 red for it. 440 auto car, and I will have a vinyl roof on it. (I still like the white color from that time, but the family won the argument)

J and the car.jpg
 
Mike69RT hope your daughter wants to ride in it to her wedding and not something else. :rolleyes::D
 
Last edited:
eldubb440 said:
dude that owns the car.........nice setup
Click to expand...
seen another one like that years ago by a member on here that used it for his project and then put it up for sale ,very nice would like to make one or purchase one thanks you do some very very nice work
 
Getting close on my 1966 Dodge D100. Automatic trans conversion almost completed and cab goes back on after new floor installed. Automatic trans conversion is MUCH easier with the cab and bed off!!!

 
Waiting for the Satellite to come back from the paint shop for the second time so I can finish putting the trim, markers, and rear bumper back on.
 
You must log in or register to reply here.

Similar threads

W
Introduction
Replies
15
Views
494
mr. b
mr. b
Bleep Bleep
Is ‘69 roadrunner headlamp control switch question
Replies
7
Views
589
Bleep Bleep
Bleep Bleep
72 BLUE 400
What's it Worth going rate on 72 charger hideaway headlight setup
Replies
0
Views
222
72 BLUE 400
72 BLUE 400
M
1978 dodge magnum 360 manual transmission swap
Replies
5
Views
403
YY1
YY1
Kowality
  • Locked
Air Grabber Issue
Replies
9
Views
1K
kiwigtx
kiwigtx
Auto Transport Service
Back
Top