whats it worth 400 engine(motor)

[jim440gtx]

casting date 2-23-73--other #3688630.400 4 on same side block.it has been in my heated basement for close 15 yrs, heads are off and a wear ring at top cylinder so it has some miles. Spins freely no spun bearings, have old 440 cam can throw in with it but would have to look for intake. Also no distributor. Anyone relatively close interested, Duncansville Pa. 16635

 

[ruffcut]

casting date 2-23-73--other #3688630.400 4 on same side block.it has been in my heated basement for close 15 yrs, heads are off and a wear ring at top cylinder so it has some miles. Spins freely no spun bearings, have old 440 cam can throw in with it but would have to look for intake. Also no distributor. Anyone relatively close interested, Duncansville Pa. 16635

 

[ruffcut]

I'm interested! Shoot me a number. ruffcut

 

[jim440gtx]

honestly do not have one as i am used to hoarding but wifes pneumonia bills adding up. Have dog dish hub caps supposedly from 63-64 polara small block 727 trans housing, valve body as well but housing is outside, Have new 440 for 67 R/T but not for sale yet.

 

[ruffcut]

you don't have a price for the 400, or you don't have a 400 for sale. Which is it? ruffcut

 

[RemCharger]

That's weird right in the title he says what's it worth.
Sounds like the right time to make an offer

 

[ruffcut]

???????

 

[yella71]

Yes make him an offer , he cant seem to be the one to put the first offer on the table.

 

[RemCharger]

Could be a problem with very fabric of the space-time continuum?
Or something to do with that 5g ****

 

[ruffcut]

Well OK. I'll make an offer. $200.

 

[jim440gtx]

unfortunately i do not sit at computer all day not retired yet. would go 375.00. Originally i thought it would be worth 500 to 600 but do not want to sit on it right now. Also truck not inspected so cannot meet if interested, but i do have cherry picker.

 

[ruffcut]

I respectfully decline as 375 is more than I'm willing to spend. The block is the only part of interest as it would need bored and need new pistons etc. Thank you for your time and hope you find a buyer willing to meet your price. Praying your wife makes a speedy and complete recovery from her illness as well. ruffcut