where can I buy and engine cradle for a BB mopar

[jprather]

cant seem to find one for a BB mopar, can find for SB and any gm or ford .. any suggestions

 

[MoparLeo]

I am sure that there are more and you can buy plans to make yourself. Most company's will price match.
https://www.jegs.com/i/JEGS/555/800644/10002/-1
https://www.summitracing.com/parts/aaf-all10156/applications

 

[Sahara]

I got one from Jegs.

 

[jprather]

man, whats up with the casters costing extra !

 

[Daves69]

Maybe make one. Here's an example...……..
https://www.forabodiesonly.com/mopar/ams/how-i-made-my-engine-dolly.99/

 

[jprather]

Maybe make one. Here's an example...……..
https://www.forabodiesonly.com/mopar/ams/how-i-made-my-engine-dolly.99/

hmmm, i like that

 

[metaldad]

i welded up some 2x2x1/4 square stock i had laying around

 

[andyf]

cant seem to find one for a BB mopar, can find for SB and any gm or ford .. any suggestions

If you want a real engine dolly with heavy duty casters then you need to contact either US Car Tool or Bob Mazzolini Racing. They both have versions of the engine dollies that I used to make.

 

[493 Mike]

I wrote up my design years ago, I believe on this forum.
Mike

 

[dadsbee]

Nice Mike, reminds me of my fancy K frame assembly stand.

 

[Dajkzo]

I bought one from Mancini. And then my family of Mopar big blocks grew so I need get motivated and build two more.

https://www.manciniracing.com/enstorcrad.html

 

[MOPOWER871]

Iv'e used this one no issues you can ad casters if you want
www.manciniracing.com/albrbheavdut.html

 

[Pistol Pete]

If you want a real engine dolly with heavy duty casters then you need to contact either US Car Tool or Bob Mazzolini Racing. They both have versions of the engine dollies that I used to make.
View attachment 709822

I have one of these. Very nice piece.

 

[Challenger340]

We buy these ALLSTAR brand 6 at a time, yes the Casters cost extra, but great stands and no complaints.
https://www.summitracing.com/int/parts/aaf-all10156/applications/

 

[CudaChick1968]

I've worked over quite a few engine stands and cradles through the years. Most -- in the $30-80+ range -- were cheaply built, needed beefing up to provide peace of mind (especially if they were holding something precious), and were badly finished from the factory so they end up here.

This Hemi engine stand is a very far cry from any of its predecessors! I am very impressed. Check this bad boy out! Constructed of 2" heavy duty tubing and beautifully welded throughout, it nearly outweighs me. Yet with the high quality casters included in the box (along with Grade 8 hardware and end caps), I can easily push it with one finger.

If you're in the market for a new engine cradle, I highly encourage you to check out RCR Metal Fabrication! They are available in their black powder coat or bare as this Hemi version was ... now decked out in PSC's famous Hemi Orange and destined to safely secure an old KB pro stock Hemi.

Check out RCRmetalfab.com! You will not be disappointed. He can ship yours direct to my shop too if you have a special color in mind.