Where have all the fans gone?

[aldal]

I have been trying to order a new Mopar Vicious Fan Package as pictured below.




Can't find one anywhere....what gives?

Any info. would be appreciated.

 

[JakeS]

Funny this gets brought up here, I was just looking all over for a replacement for my Jeep. They stopped making the one I need so I went with a Hayden clutch and am using the old fan still. Hayden and 4 seasons are the only two I saw with decent reviews.
I did find one combo on ebay that was an actual Mopar part but it was $700.

 

[Moparsmitty]

You can use a Hayden fan & clutch unless your car has to be a 100 point restoration.
You can order them directly from Hayden or order them at your local parts store.
http://www.haydenauto.com/upload/HaydenAuto/Documents/Cat_Imperial/2007-imperial-fan-clutches.pdf
Much cheaper than MP.

 

[conv67bdere]

While we're on the topic of fans . . .

My 67 Belvedere Convertible was 383 car, but I got the chassis - no engine . . . and some odds an ends parts in the trunk . . . included in the trunk was a water pump, and this fan ?

I do not know if this is an original 383 fan blade or not . . .



Any clue on this fan ?

 

[hunt2elk]

I do not know if this is an original 383 fan blade or not . . .

View attachment 273303

Any clue on this fan ?

Can you make out the #'s on it? I have a book that I could look it up in.

 

[JakeS]

I think the 7 blade went with the HD cooling, possibly police package or towing package.

 

[Glenwood]

My 67 Belvedere Convertible was 383 car, but I got the chassis - no engine . . . and some odds an ends parts in the trunk . . . included in the trunk was a water pump, and this fan ?

I do not know if this is an original 383 fan blade or not . . .

View attachment 273303

Any clue on this fan ?

I just bought one of these off a guy who said it came off a mid 70's Newport with a 400ci. Threw it on the 318 Poly and it felt like the car had more power. I was hoping for better cooling but I'll need some hot weather to test it.

 

[conv67bdere]

Finally found the part number

Can you make out the #'s on it? I have a book that I could look it up in.

H2E . . . finally got it cleaned up and found the part number on it . . . P15430



Maybe now you might be able to tell me where this thing came from . . .

Assumed it was from my 383 that was in the car . . . but that is only a guess . . . who knows where it came from ? ? ?

 

[hunt2elk]

Not sure what that # is Larry. There should be a 7 digit # somewhere on a blade like on the left side of this chart. Some I have seen were just stamped with paint, so it may have been cleaned off in a previous life.

 

[mopared@]

this fan came stock on my original 1967 Plymouth Satellite 318 cid factory air car.
I have upgraded to a 360 cid 380hp engine ... This fan is in use on.
Car always run cool.

Reggie.

 

[Mr Gorsky]

Tony's Parts:

New drive, no new blades, but they'll have second hand ones.

http://www.tonysparts.com/newproductsB.htm