All4rocks
Well-Known Member
Anyone know who specializes in hemi building or who would like to help me assemble my hemi? Located in grass valley Ca.
Who is the hemi engine building guru by sacramento Ca.?
- Thread starter All4rocks
- Start date
- Local time
- 4:25 AM
- Joined
- Apr 13, 2012
- Messages
- 40,198
- Reaction score
- 149,331
- Location
- Granite Bay CA
I have a buddy in Nevada City. He isn't a Hemi guy though...
Maybe call Rick at Vic's Harbor Machine in West Sacramento. I have had Rick do every bit of machine work I have needed since 2001.
Maybe call Rick at Vic's Harbor Machine in West Sacramento. I have had Rick do every bit of machine work I have needed since 2001.
All4rocks
Well-Known Member
Not looking for a full rebuild. This was a complete running engine but now the heads, timing cover, intake are off and need advice or help putting it back together. It has a hydraulic roller cam and the rockers have the set screw and the locknut which i thought were for solid lifter not hydraulic. How do i adjust these with hydraulic lifters? The same as if they were just a nut on a stud? (tighten down until all slack is out of pushrod then turn 3/4 of a turn more)?
Also, any sort of sealant when installing the intake gaskets? What kind?
Similar threads
