Wiring for '67 Charger

[chrisd]

I'm looking for a wiring harness for a '67 Charger. I don't believe that a '66 is any different, but it has to be from a Charger. Another B body won't work.
PM me if you've got anything.
Thanks

 

[Topher]

66 is quite different than a 67. Which harness are you looking for? Engine, forward light, dash, rear?

 

[chrisd]

Firewall foward. 318 motor. What's different on the '66's?

 

[Topher]

The biggest one that sticks out is the addition of the low brake pressure switch in 67. Location of the horn relay is different in 67 too. I sat down with both years schematics and a 66 harness and made the necessary changes to make it a 67 for my car. I had to change the placement of a couple wires in the bulkhead also. That was 7 years ago and I didn't make any notes. What's wrong with yours?

 

[beeguy]

69runner is a little nazi douche.

I've asked you 100 times to take my name of your " please come back " list. as long as a loser like you can be a mod I'm not interested. just do it you still have a half dozen members you don't need me so stop bugging me.

 

[Topher]

What does that have to do with the wiring on a 67 Charger? If you have a problem with someone either send him a PM or go visit him at home. Don't post your Pansi Problems on the forum.

 

[chrisd]

69runner is a little nazi douche.

I've asked you 100 times to take my name of your " please come back " list. As long as a loser like you can be a mod i'm not interested. Just do it you still have a half dozen members you don't need me so stop bugging me.

wtf?

 

[chrisd]

The biggest one that sticks out is the addition of the low brake pressure switch in 67. Location of the horn relay is different in 67 too. I sat down with both years schematics and a 66 harness and made the necessary changes to make it a 67 for my car. I had to change the placement of a couple wires in the bulkhead also. That was 7 years ago and I didn't make any notes. What's wrong with yours?

I didn't know about the brake switch. The biggest thing I could think of was the turn signals. Mine may be donated to the Belvedere convertible that I'm trying to sell. It may be easier and cheaper to find a Belvedere harness along with the grill/headlight assembly though.

 

[beeguy]

Hey I'll play until he finds this.

69runner made a political thread a year or so ago and I made the mistake of not agreeing with his opinion. for that he banned me for 3 days, I broke no rules and said nothing out of line. I haven't been back until now because I'm tired of the " please come back " crap on my email all the time.

this isn't a bad site but if guys like him are going to run it I've found better.

 

[chrisd]

Hey I'll play until he finds this.

69runner made a political thread a year or so ago and I made the mistake of not agreeing with his opinion. for that he banned me for 3 days, I broke no rules and said nothing out of line. I haven't been back until now because I'm tired of the " please come back " crap on my email all the time.

this isn't a bad site but if guys like him are going to run it I've found better.

Hey Beeguy F@%$ OFF!! I'm trying to find something for my car and don't need your whining tittie baby problems! Go cry at someone else you stupid c&*% sucker.

 

[Redhorse719]

Talk about hijacking a thread!:nono:

 

[71petty]

hey i have some 66-67 charger harnesess ill check and get back to you thanks brian i have some other 66-67 charger parts call me 770-355-1680

 

[daredevil]

Hey Beeguy F@%$ OFF!! I'm trying to find something for my car and don't need your whining tittie baby problems! Go cry at someone else you stupid c&*% sucker.

Way to set him straight. What a whiner. I dont always agree with Runners heavy handedness but it is what it is. A real man deals with it and moves on.

 

[RON LAPIANA]

Painless worked great in 65 ply. B bod

 

[chrisd]

Painless worked great in 65 ply. B bod

Does it really? Every Painless I've seen (and I've only seen them in catalogs) looks like a universal set.I'd like to have the factory look as much as possible.

 

[cudamark]

I have some harnesses I can check if you still need one........
Thanks, Mark

 

[69 Runner]

Don't know why that guy has his panties in a wad. He hasn't asked me to remove him from anything. Joey, on the other hand, has told him several times how he can stop getting the messages from the site. I have nothing to do with those, and don't send any mass emails of any kind to members here.

But I've granted his wish, and he is gone for good.

Now back to your wiring problems......

 

[Slantsixdan]

I've had really nice, factory-exact new engine wiring harnesses for my Mopars at cost-effective prices from Evans Wiring. They list only a portion of what they make; if you don't see what you need send them an e-mail.