WTB MK662 Raybestos Master cylinder kit

[69 hemibee]

As title says, looking for a MK662 kit for a MC with 1 1/8" bore....thanks.

 

[70a34bee]

As title says, looking for a MK662 kit for a MC with 1 1/8" bore....thanks.

Good luck finding one. I sent my master cylinder to White Post Restorations and had mine rebuilt off of my 70 bee.

 

[XS22J8R]

Are all the MC kits discontinued now? Sucks if that is the case!
Someone contacted me not long ago searching for one, since I used to be an engineer at the company that makes Raybestos.
My advice was why not buy a MC36283 master cylinder and pirate the piston assemblies out of it to use to rebuild your original MC? Those MCs aren’t all that expensive. I’m passing that hint along hope it helps.

 

[69 hemibee]

Thanks for the tip. I've looked everywhere and thought I found a kit when vivid racing showed some in stock but my order was canceled the following day. Figured I'd look here before exploring other means.

 

[Dragon Slayer]

Interesting how they dried up. Do you have your pistons out of the MC and are they in good condition? If so you might find the 1 1/8" seals and shims in a kit. If you need pistons because of damage, then you will need the kit.

 

[69 hemibee]

Interesting how they dried up. Do you have your pistons out of the MC and are they in good condition? If so you might find the 1 1/8" seals and shims in a kit. If you need pistons because of damage, then you will need the kit.

I haven't disassembled it yet until I find a kit.

 

[XS22J8R]

2 or 3 years ago I heard through the grapevine that the Raybestos MK551 kit wasn't available anymore. That kit has 1" seals that are correct for rebuilding the rare 1970 only 2229171 casting disc brake MC for E bodies. I managed to find 2 kits online to stockpile for the day either of my disc brake 70 Challengers MCs need rebuilding. I'd say that indicates they have been phasing out these kits for a few years.
This MC is Raybestos version of the 2225621 casting MC and the pistons in it are the same ones they until recently supplied in the kits.
Amazon product ASIN B000C75NZ8Going forward this is going to make it much trickier to rebuild original master cylinders for restorations. I haven't talked to Brake and Equipment Warehouse in MN, who've I have used over the years to sleeve and rebuild brake parts for me, I wonder that they and White Post are doing to get components for their work?

 

[69 hemibee]

Still looking for a kit...thanks.

 

[70a34bee]

Still looking for a kit...thanks.

I never did find one that's why I sent mine out to get rebuilt. It cost 230 dollars and I had it back in 3 weeks.

 

[69 hemibee]

I never did find one that's why I sent mine out to get rebuilt. It cost 230 dollars and I had it back in 3 weeks.

Who did you use if you don't mind me asking? White post restorations, Dr. Diff?

 

[70a34bee]

Who did you use if you don't mind me asking? White post restorations, Dr. Diff?

White post restoration

 

[1 Wild R/T]

The seal kits for the 66-69 Bendix 4 piston B body calipers are gone too.......

 

[440 4 speed]

The seal kits for the 66-69 Bendix 4 piston B body calipers are gone too.......

I got a seal kit a couple of months ago, from our local parts store.

 

[69 hemibee]

I got a seal kit a couple of months ago, from our local parts store.

Which parts store? Napa, AutoZone, oreillys don't have there around here (NW Fl).

 

[440 4 speed]

Which parts store? Napa, AutoZone, oreillys don't have there around here (NW Fl).

Local parts store WSSL Automotive.
Raysbestos WK 518. Took about 3 weeks to get them.

 

[69 hemibee]

Local parts store WSSL Automotive.
Raysbestos WK 518. Took about 3 weeks to get them.

Quick search and this seems to be the caliper kit. I'm in need of the master cylinder kit.

 

[1 Wild R/T]

Local parts store WSSL Automotive.
Raysbestos WK 518. Took about 3 weeks to get them.

WK518 fits the A bodies and Mustang.. Supposedly not B Bodies.... If you put it on a B Body & it fit I want to know about it. cause I need a couple seal kits

 

[RemCharger]

I've seen some a body 4 piston calipers , and they sure look like b body's.
That's as far as I've investigated

 

[440 4 speed]

Quick search and this seems to be the caliper kit. I'm in need of the master cylinder kit.

Sorry I was replying to 1 Wild R/T.

 

[toolmanmike]

As title says, looking for a MK662 kit for a MC with 1 1/8" bore....thanks.

Lots of good information in this thread but you should have started a parts wanted thread. (in the right forum)