Recent content by Tblightning

I am looking for the discharge hose/pipe that attaches to the high side muffler coming off the compressor , goes around the battery, across the radiator support, then goes the length of the radiator support to the condenser. This is a combination of a flex hose and steel pipe. I know this fits...

Honestly, I don't know. I will check my collection of fasteners and see if I can find any.

I have the piece you're looking for. It only has one retaining stud. If you have retainers studs this would be useable. It is in decent condition, straight , not dings, chrome looks like all it needs is a good cleaning and buffing.

For a 68 Charger, I am converting from automatic to manual transmission. while assembling the pedal assembly I have come across a dilemma. What holds the overcenter spring to the pedal housing ? Having researched this, having very little info, hopefully someone can help with this. Thanks

Instead of finding another kit I modified mine by shortening 2 of the extra long ones. Maybe that's what you're supposed to do with the extra long ones. I don't know but I was able to get it to work.

I bought mine from vansautollc. It did not come with the short studs for the center as well.

Currently restoring the grille on my 68, i purchased the fastener kit for the two long horizontal chrome trim pieced and the corner "C " pieces. The kit came with longer threaded studs as well as shorter studs. Can anybody tell me the location of these as well as the 8 flex tabs. The kit came...

Thanks for all the info. I was correct in regards to the lower section, I did not know about the other section. Great information.

Having a black interior would mean the lower door section that is only viable from the inside should also be black. Not satin but gloss I would imagine.

Having owned a 68 charger for 40 plus years. There have been differing opinions on whether or not the lower internal door under the trim panel is painted body color or a satin black, The original body color is medium gold. Thanks for the help.

I've owned this car for 42 years, removed the A/C back in 1978 to lighten the load for racing and didn't have the sense to keep the parts. Now that I've accumulated all the correct parts I wanted to make sure it is correct. I do remember it looking very much like the car that is green, but I...

I have been getting conflicting information if the a/c pipes that run along and in front of the radiator support and the pipe running from the condenser to the drier are supposed to be painted ? As well as the hood spring , release lever and latch. This is on a 68 Charger R/T.

It looks a bit different. I'll give it a shot.

Hi, My name is Kent, I bought the A/C hoses and brackets for my 68 Charger from you . All is good with those pieces, Should work out fine. Except I didn't realize the part called a manifold fitting that bolts to the back of the compressor points slightly upward to accommodate the bend in the...

How much for the flex hose, ( the one on the right from the Chrysler) the pipe , and the brackets, Including the one the comes from the corner bracket and attaches to the intake manifold , the two smaller ones that attaches to the pipe and then attaches to the intake manifold drivers and...