Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I believe Accurate exhaust has videos of both their Hemi and performance mufflers, both sound good to me. I'm going with 2.5" Dynomax Ultraflos after a ton of research including videos and recommendations.
I've got a Mopar M1 Dual Plane under my 70 Airgrabber air cleaner but will try my DP4B when I rebuild the motor. Of course, the six pack intake / air cleaner works just fine as well.
I tried wearing my 70 Roadrunner's shoulder belt once. I sit fairly tall in the seat and the belt hit me right across my throat, didn't think that would be good in an accident so never wore it again. Wanting the car to be safer for me and my passengers and ultimately my son who will get the...
Here you go:
Vehicle Make BB Chrysler, Chrysler Camshaft
Type Hydraulic Roller
RPM Range 2200 to 6200
Intake Lift 0.535 Exhaust Lift 0.550
Intake Duration at 50 231 Exhaust Duration at 50 239
Advertised Intake Duration 282Advertised Exhaust Duration 290
Camshaft Series Voodoo
Valve Setting...
That is awesome, thanks for sharing! I've got 2.5" Dynomax Ultraflos and planning on using TTI exhaust which it looks like you might too? And that's the perfect exhaust note in my mind, not loud but has that deep "move the air" quality that screams power, not noise. Congrats!
The 4.25" crank was my plan until I became concerned about longevity / saving the block. I already have a very similar Lunati Hydraulic roller I'd like to use and would be interested in how much 'lope' you have on the 496"? I've been told our cams are on the tame side for these larger stroker...
Trust me, I got that and at one time I might have gone the super high HP route, but as I get older so does the car and I began to value what's there for that very reason. Thx
Based on this, it would seem a lighter internals 432 is less stress on the block than a heavier 'stock' 383 rotating assembly even with the extra HP/TQ it would produce. Does that sound right? Thx
I know I should pull & store my Roadrunner's numbers matching 383, but what I will be doing instead is building it to a 'safe' power level and just not abusing it unnecessarily; no burnout contests, limited track time, mostly cruising and 'feeling the power' from time to time.
At what power...
We used Simparica Trio for several years, until my wife after reading several negative articles about it made the switch to 'Heartworm only' chewables. The other protected against fleas, but ours are indoor dogs so don't have much of a problem with them. Read up on the negative side effects of...